Glow Plugs
Naturally Aspirated Engines
Show/hide table
 | |
| Illustration 1 | g00988137 |
(1) Tighten the glow plugs in the cylinder head to the following torque. ... 15 to 20 N·m (11 to 15 lb ft)
Type ... 12 Volt
Current (30 second rating) ... 9.7 amperes
Turbocharged Engines
Show/hide table
 | |
| Illustration 2 | g01353859 |
(1) Tighten the glow plugs in the cylinder head to the following torque. ... 20 to 30 N·m (15 to 22 lb ft)
Type ... 12 Volt
Current (30 second rating) ... 5.5 amperes
Caterpillar Information System:
C7 On-highway Engine Engine Oil Filter Base - Remove
3516B HD Generator Set Overhaul (Top End)
3126B Petroleum Engine Excessive White Smoke
G3304 and G3306 Engines Vibration Damper and Pulley - Remove
3516B HD Generator Set Overhaul (Major)
C9 Urban Transit Bus Engine Air Inlet Cover - Install
C9 Urban Transit Bus Engine Air Inlet Cover - Remove
C1.5 and C2.2 Generator General Information
G3304 and G3306 Engines Engine Oil Cooler - Assemble
C7 On-Highway Engine Lifter Group - Remove and Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 Engines for Caterpillar Built Machines Unit Injector - Install
3044C Industrial Engine After Stopping Engine
3044C Industrial Engine Cooling System Coolant (DEAC) - Change
C15 On-Highway Engines Lubrication System
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
G3304 and G3306 Engines Vibration Damper and Pulley - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
G3304 and G3306 Engines Crankshaft Front Seal and Wear Sleeve - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3044C Industrial Engine Engine Oil and Filter - Change
C7 On-highway Engine Connecting Rod Bearings - Install
C7 Engines for Combat and Tactical Vehicles System Overview
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove