Engine Oil Pump - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seals. Position engine oil pump (3) on the cylinder block.
- Install bolts (1) and bolt (2).
Show/hide table
| |
| Illustration 1 | g00987795 |
End By:
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar Information System:
C7 Marine Engines Engine Oil Pump - Assemble
C9 On-Highway Engines Cooling System - Test
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
3516B HD Generator Set Reference Information
C9 Urban Transit Bus Engine Vibration Damper and Pulley - Remove and Install
C7 Marine Engines Engine Oil Pump - Disassemble
C15 On-highway Engine Fuel Filter Base
C7 Marine Engines Engine Oil Pump - Remove
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover - Remove and Install
C7 Marine Engines Rocker Shaft and Pushrod - Install
C4.4 (Mech) Industrial Engine Battery - Test
C7 Marine Engines Rocker Shaft and Pushrod - Remove
3046 Engine for Caterpillar Built Machines Flywheel Housing - Inspect
C7 On-Highway Engine Engine Oil Pan - Remove and Install
C7 Engines for Caterpillar Built Machines Unit Injector - Remove
C7 Engines for Caterpillar Built Machines Unit Injector - Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 On-Highway Engine Lifter Group - Remove and Install
G3304 and G3306 Engines Engine Oil Cooler - Assemble
C1.5 and C2.2 Generator General Information
C9 Urban Transit Bus Engine Air Inlet Cover - Remove
C9 Urban Transit Bus Engine Air Inlet Cover - Install
3516B HD Generator Set Overhaul (Major)
G3304 and G3306 Engines Vibration Damper and Pulley - Remove