C7 PETROLEUM Petroleum Engine Caterpillar


Valve Mechanism Cover - Remove and Install

Usage:

C7 C7P

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01125461

  1. Remove bolts (1).

  2. Remove valve mechanism cover (2).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g01125461


    Illustration 3g00945775

  1. Position valve mechanism cover (2) on the engine.

  2. Install bolts (1). Tighten bolts (1) in a numerical sequence to a torque of 15 ± 3 N·m (11 ± 2 lb ft).
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.