Engine Oil Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 8B-7554 | Bearing Cup Puller Gp | 1 |
B | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1), oil pickup tube (2), and the gasket from the engine oil pump. Remove bolt (3) and outlet elbow (4) from the engine oil pump.
Show/hide table
Illustration 2 g01127673 - Remove bolt (5).
- Remove idler gear (7) from shaft (8).
- Use Tooling (B) and remove bearing (6) from idler gear (7).
- Use Tooling (A) to remove drive gear (9) from engine oil pump (10).
Show/hide table
Illustration 1 | g01127669 |
Caterpillar Information System:
C15 On-highway Engine Fuel Filter Base
C7 Marine Engines Engine Oil Pump - Remove
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover - Remove and Install
C7 Marine Engines Rocker Shaft and Pushrod - Install
C4.4 (Mech) Industrial Engine Battery - Test
C7 Marine Engines Rocker Shaft and Pushrod - Remove
C7 On-Highway Engine Fuel Filter Base - Remove and Install
C7 Marine Engines Valve Mechanism Cover Base - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Engine Speed Actuator
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Alternator - Test
C7 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C7 On-Highway Engine Injection Actuation Pressure Sensor - Remove and Install
C9 Urban Transit Bus Engine Vibration Damper and Pulley - Remove and Install
3516B HD Generator Set Reference Information
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
C9 On-Highway Engines Cooling System - Test
C7 Marine Engines Engine Oil Pump - Assemble
C7 Marine Engines Engine Oil Pump - Install
3046 Engine for Caterpillar Built Machines Flywheel Housing - Inspect
C7 On-Highway Engine Engine Oil Pan - Remove and Install
C7 Engines for Caterpillar Built Machines Unit Injector - Remove
C7 Engines for Caterpillar Built Machines Unit Injector - Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 On-Highway Engine Lifter Group - Remove and Install