Engine Oil Pump - Remove
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) and bolt (2).
- Remove engine oil pump (3).
- Remove the O-ring seals.
Show/hide table
| |
| Illustration 1 | g00987795 |
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover - Remove and Install
C7 Marine Engines Rocker Shaft and Pushrod - Install
C4.4 (Mech) Industrial Engine Battery - Test
C7 Marine Engines Rocker Shaft and Pushrod - Remove
C7 On-Highway Engine Fuel Filter Base - Remove and Install
C7 Marine Engines Valve Mechanism Cover Base - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Engine Speed Actuator
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Alternator - Test
C7 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C7 On-Highway Engine Injection Actuation Pressure Sensor - Remove and Install
C7 On-Highway Engine Camshaft - Install
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Troubleshooting
C15 On-highway Engine Fuel Filter Base
C7 Marine Engines Engine Oil Pump - Disassemble
C9 Urban Transit Bus Engine Vibration Damper and Pulley - Remove and Install
3516B HD Generator Set Reference Information
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
C9 On-Highway Engines Cooling System - Test
C7 Marine Engines Engine Oil Pump - Assemble
C7 Marine Engines Engine Oil Pump - Install
3046 Engine for Caterpillar Built Machines Flywheel Housing - Inspect
C7 On-Highway Engine Engine Oil Pan - Remove and Install
C7 Engines for Caterpillar Built Machines Unit Injector - Remove
C7 Engines for Caterpillar Built Machines Unit Injector - Install