A New Special Instruction Provides Information About The Protection Of The Oil System During Major Repair {1000, 1300, 7581}
- Engines:
- 3600 Diesel
- G3600
The new Special Instruction, REHS1451, "Procedure for Protection of the Oil System During Major Repair" is available. This special instruction documents some of the guidelines that should be followed in order to protect the oil system when the engine is undergoing a major repair. This special instruction will document the following steps:
- Protect the oil system prior to repair and during repair.
- Flush the oil system prior to reassembly of components.
- Determine the cleanliness of the oil system prior to the engine commissioning and after engine repair.
This special instruction is available through normal literature ordering channels. The new Special Instruction, REHS1451, "Procedure for Protection of the Oil System During Major Repair" is also available for electronic distribution in the Service Information System (SIS).
Caterpillar Information System:
C11 and C13 On-Highway Engines Rocker Shaft
C11 and C13 On-Highway Engines Lifter Group
3056E Industrial Engine Inlet Manifold - Install
3056E Industrial Engine Inlet Manifold - Remove
3056E Industrial Engine Inlet Air Temperature Sensor - Remove and Install
SR4 HV and SR4B HV Generators Generator Start-up Checklist
G3406 Engines Cylinder Head Valves
C11 and C13 On-Highway Engines Electronic Unit Injector
3056E Industrial Engine Boost Pressure Sensor - Remove and Install
C11 and C13 On-Highway Engines Engine Design
3056E Industrial Engine Valve Mechanism Cover - Remove and Install
C13 On-highway Engine Engine Design
G3406 and G3412 Generator Set Engines Cover Group (Rear Housing)
G3408 and G3412 Engines Cover Group (Front Housing)
G3408 and G3412 Engines Cover Group (Rear Housing)
2002/11/11 Change in Torque for Camshaft Gear Bolt {1210, 1212}
2002/11/01 Change in Torque for Camshaft Gear Bolt {1210, 1212}
G3408 and G3412 Engines Cylinder Head Valves
3056E Industrial Engine Inlet and Exhaust Valves - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Disassemble
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Assemble
G3406 Engines Crankshaft
2003/02/01 A New Overhaul Protection Group Is Available For The Overhaul Of A Cylinder {1000, 7950, 795C}
C7 Petroleum Engines Electronic Control System Components