Rocker Shaft
Show/hide table
图 1 | g00936120 |
(A) 将孔塞安装至以下深度。 ... 1 ± 0.25 mm
(0.040 ± 0.010 in)
(B) 摇臂轴直径 ... 34.00 ± 0.010 mm
(1.339 ± 0.0005 in)
Caterpillar Information System:
C11 and C13 On-Highway Engines Lifter Group
3056E Industrial Engine Inlet Manifold - Install
3056E Industrial Engine Inlet Manifold - Remove
3056E Industrial Engine Inlet Air Temperature Sensor - Remove and Install
SR4 HV and SR4B HV Generators Generator Start-up Checklist
G3406 Engines Cylinder Head Valves
C11 and C13 On-Highway Engines Electronic Unit Injector
3056E Industrial Engine Boost Pressure Sensor - Remove and Install
C11 and C13 On-Highway Engines Engine Design
3056E Industrial Engine Valve Mechanism Cover - Remove and Install
C13 On-highway Engine Engine Design
G3408 and G3412 Engines Piston and Rings
2002/11/01 A New Special Instruction Provides Information About The Protection Of The Oil System During Major Repair {1000, 1300, 7581}
G3406 and G3412 Generator Set Engines Cover Group (Rear Housing)
G3408 and G3412 Engines Cover Group (Front Housing)
G3408 and G3412 Engines Cover Group (Rear Housing)
2002/11/11 Change in Torque for Camshaft Gear Bolt {1210, 1212}
2002/11/01 Change in Torque for Camshaft Gear Bolt {1210, 1212}
G3408 and G3412 Engines Cylinder Head Valves
3056E Industrial Engine Inlet and Exhaust Valves - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Disassemble
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Assemble
G3406 Engines Crankshaft
2003/02/01 A New Overhaul Protection Group Is Available For The Overhaul Of A Cylinder {1000, 7950, 795C}