Electronic Unit Injector
Show/hide table
图 1 | g00935781 |
(1) 使用 8T-2998 润滑剂 和机油各一半混合润滑密封圈和孔。
(2) 螺栓扭矩 ... 55 ± 10 N·m (40 ± 7 lb ft)
Caterpillar Information System:
3056E Industrial Engine Boost Pressure Sensor - Remove and Install
C11 and C13 On-Highway Engines Engine Design
3056E Industrial Engine Valve Mechanism Cover - Remove and Install
C13 On-highway Engine Engine Design
G3408 and G3412 Engines Piston and Rings
3056E Industrial Engine Exhaust Manifold - Remove and Install - Two-Piece Exhaust Manifold
2002/11/01 A New Fuel Transfer Pump Group Is Used {1256}
G3408 and G3412 Engines Idler Gear Assembly
416C, 426C, 428C, 436C and 438C Backhoe Loaders Emissions Certification Film
G3520C and G3520E Engines Spark Plug
G3500 Engines Exhaust Manifold - Dry
3056E Industrial Engine Exhaust Manifold - Remove and Install - Three-Piece Exhaust Manifold
G3406 Engines Cylinder Head Valves
SR4 HV and SR4B HV Generators Generator Start-up Checklist
3056E Industrial Engine Inlet Air Temperature Sensor - Remove and Install
3056E Industrial Engine Inlet Manifold - Remove
3056E Industrial Engine Inlet Manifold - Install
C11 and C13 On-Highway Engines Lifter Group
C11 and C13 On-Highway Engines Rocker Shaft
2002/11/01 A New Special Instruction Provides Information About The Protection Of The Oil System During Major Repair {1000, 1300, 7581}
G3406 and G3412 Generator Set Engines Cover Group (Rear Housing)
G3408 and G3412 Engines Cover Group (Front Housing)
G3408 and G3412 Engines Cover Group (Rear Housing)
2002/11/11 Change in Torque for Camshaft Gear Bolt {1210, 1212}