Oil Filter (Return)
Show/hide table
| 图 1 | g01411613 |
(1) 4 只螺栓的扭矩 ... 3.0 ± 1.0 N·m (27 ± 9 lb in)
(2) 8 只螺栓的扭矩 ... 30 ± 5 N·m (265 ± 45 lb in)
(3) 四只螺钉的扭矩 ... 3.0 ± 1.0 N·m (27 ± 9 lb in)
Caterpillar Information System:
2002/10/01 New Digital Voltage Regulator (DVR) Is Now Available {1410}
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Engine Valve Lash - Inspect/Adjust
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injection Actuation Pressure - Test
C7 Engines for Combat and Tactical Vehicles Wait To Start Lamp Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed Circuit - Calibrate
C9 Urban Transit Bus Engine Vehicle Speed and Speedometer Circuit - Test
C7 and C9 On-Highway Engines Wastegate Solenoid - Test
C9 Urban Transit Bus Engine Powertrain Data Link Circuit - Test
C-15 and C-16 Industrial Engines Electronic Control Module - Remove and Install
G3520C and G3520E Generator Set Engines Fuel System Operation
3512B Marine Auxiliary Engine Lubrication System Operation - Generator
C-15, C-16, and C-18 Truck Engines Fuel Transfer Pump
3126B and 3126E On-highway Engines Remote PTO Accelerator Position Sensor Circuit - Test
3054E Industrial Engine Cylinder Block - Inspect
C7 and C9 On-Highway Engines Sensors and Electrical Connectors
C-10, C-12, C-15 and C-16 Industrial Engines CID 0022 FMI 13 Timing Sensor calibration required
PMG3516 Power Module Overhaul (In-Frame)
C4.4 (Mech) Industrial Engine Gear Group - Inspect
C7 and C9 On-Highway Engines Data Link Parameters
3054E Industrial Engine Crankcase Breather
3054E Industrial Engine Fan Drive
C-15, C-16, and C-18 Engines Fuel System
3512B Marine Auxiliary Engine Inspecting Electrical Connectors
C9 On-highway Engines Gauges and Indicators