Electronic Control Module - Remove and Install
Removal Procedure
- Turn the battery disconnect switch to the OFF position.
- Disconnect hose assemblies (1) .
Show/hide table
Illustration 1 | g00925492 |
- Remove clip (2) and position hose assembly out of the way.
- Remove cover (3) .
- Loosen bolts (4) until the harness assemblies can be disconnected. Disconnect the harness assembly.
- Remove bolts (5). Remove electronic control module (6) from the engine.
Installation procedure
- Position electronic control module (6) on the engine. Install bolts (5) .
Show/hide table
Illustration 2 | g00925492 |
- Connect the harness assemblies. Tighten bolts (4) to a torque of 6 ± 1 N·m (53 ± 9 lb in).
- Install cover (3) .
- Install clip (2) .
- Connect hose assemblies (1) .
- Turn the battery disconnect switch to the ON position.
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Fuel System Operation
3512B Marine Auxiliary Engine Lubrication System Operation - Generator
C-15, C-16, and C-18 Truck Engines Fuel Transfer Pump
C9 Urban Transit Bus Engine Injector Solenoid Circuit - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Inspect
C-15, C-16, and C-18 Truck Engines Engine Oil Filter Base
G3520C and G3520E Engines Junction Box
C-15, C-16, and C-18 Truck Engines Exhaust Manifold
G3520C and G3520E Engines Air Inlet Elbow
C4.4 (Mech) Industrial Engine Basic Engine
C11, C13 and C15 On-highway Engines Sensors and Electrical Connectors
3512B Marine Auxiliary Engine Intermittent Engine Shutdown
C9 Urban Transit Bus Engine Powertrain Data Link Circuit - Test
C7 and C9 On-Highway Engines Wastegate Solenoid - Test
C9 Urban Transit Bus Engine Vehicle Speed and Speedometer Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed Circuit - Calibrate
C7 Engines for Combat and Tactical Vehicles Wait To Start Lamp Circuit - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injection Actuation Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Engine Valve Lash - Inspect/Adjust
2002/10/01 New Digital Voltage Regulator (DVR) Is Now Available {1410}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Return)
3126B and 3126E On-highway Engines Remote PTO Accelerator Position Sensor Circuit - Test
3054E Industrial Engine Cylinder Block - Inspect
C7 and C9 On-Highway Engines Sensors and Electrical Connectors