Exhaust Manifold
Show/hide table
Illustration 1 | g01342223 |
Show/hide table
Illustration 2 | g01342225 |
View A-A |
Show/hide table
Illustration 3 | g00566145 |
Tightening sequence |
(1) Stud
- Torque for studs in cylinder head ...
35 ± 5 N·m (26 ± 4 lb ft)
Apply 5P-3931 Anti-Seize Compound to the threads of the studs that engage the locknuts.
(2) Manifold ends
Apply engine oil to the female ends of the manifolds before assembly. Apply 2P-2333 High Temperature Sealer to the male ends of the manifolds before assembly. Remove excess sealer from the assembled joint.
(3) Locknut
- Torque for locknuts ...
38 ± 5 N·m (28 ± 4 lb ft)
Tighten the locknuts in the numerical sequence that is shown in Illustration 3.
Show/hide table
Illustration 4 | g01342231 |
Show/hide table
Illustration 5 | g01342235 |
(1) Stud
- Torque for studs in cylinder head ...
35 ± 5 N·m (26 ± 4 lb ft)
Apply 5P-3931 Anti-Seize Compound to the threads of the studs that engage the locknuts.
(2) Locknut
- Torque for the locknuts ...
38 ± 5 N·m (28 ± 4 lb ft)
Caterpillar Information System:
G3520C and G3520E Engines Air Inlet Elbow
C4.4 (Mech) Industrial Engine Basic Engine
C11, C13 and C15 On-highway Engines Sensors and Electrical Connectors
3512B Marine Auxiliary Engine Intermittent Engine Shutdown
3512B Marine Auxiliary Engine Engine Starting
C7 and C9 On-Highway Engines Injection Actuation Pressure Sensor - Test
120H and 135H Motor Graders Machine Systems Gerotor Motor (Circle Drive) - Disassemble
120H and 135H Motor Graders Machine Systems Gerotor Motor (Circle Drive) - Assemble
3512B Marine Auxiliary Engine Lubrication System Operation - Engine
Do Not Mix the 218-3589 Pistons with any Previously Produced Pistons on 3600 Engines Do Not Mix the 218-3589 Pistons with any Previously Produced Pistons on 3600 Engines
C9 Urban Transit Bus Engine Exhaust Brake Circuit - Test
C9 Urban Transit Bus Engine Engine Temperature Sensor Open or Short Circuit - Test
G3520C and G3520E Engines Junction Box
C-15, C-16, and C-18 Truck Engines Engine Oil Filter Base
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Inspect
C9 Urban Transit Bus Engine Injector Solenoid Circuit - Test
C-15, C-16, and C-18 Truck Engines Fuel Transfer Pump
3512B Marine Auxiliary Engine Lubrication System Operation - Generator
G3520C and G3520E Generator Set Engines Fuel System Operation
C-15 and C-16 Industrial Engines Electronic Control Module - Remove and Install
C9 Urban Transit Bus Engine Powertrain Data Link Circuit - Test
C7 and C9 On-Highway Engines Wastegate Solenoid - Test
C9 Urban Transit Bus Engine Vehicle Speed and Speedometer Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed Circuit - Calibrate