Fuel Transfer Pump
Show/hide table
Illustration 1 | g00925346 |
(1) Outlet port
(2) Inlet port
Show/hide table
Illustration 2 | g00926606 |
Typical cover opposite the fuel transfer pump |
(3) Nuts
- Tighten the nuts to the following torque. ...
30 ± 5 N·m (22 ± 4 lb ft)
Caterpillar Information System:
C9 Urban Transit Bus Engine Injector Solenoid Circuit - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Inspect
C-15, C-16, and C-18 Truck Engines Engine Oil Filter Base
G3520C and G3520E Engines Junction Box
C-15, C-16, and C-18 Truck Engines Exhaust Manifold
G3520C and G3520E Engines Air Inlet Elbow
C4.4 (Mech) Industrial Engine Basic Engine
C11, C13 and C15 On-highway Engines Sensors and Electrical Connectors
3512B Marine Auxiliary Engine Intermittent Engine Shutdown
3512B Marine Auxiliary Engine Engine Starting
C7 and C9 On-Highway Engines Injection Actuation Pressure Sensor - Test
120H and 135H Motor Graders Machine Systems Gerotor Motor (Circle Drive) - Disassemble
3512B Marine Auxiliary Engine Lubrication System Operation - Generator
G3520C and G3520E Generator Set Engines Fuel System Operation
C-15 and C-16 Industrial Engines Electronic Control Module - Remove and Install
C9 Urban Transit Bus Engine Powertrain Data Link Circuit - Test
C7 and C9 On-Highway Engines Wastegate Solenoid - Test
C9 Urban Transit Bus Engine Vehicle Speed and Speedometer Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed Circuit - Calibrate
C7 Engines for Combat and Tactical Vehicles Wait To Start Lamp Circuit - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injection Actuation Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Engine Valve Lash - Inspect/Adjust
2002/10/01 New Digital Voltage Regulator (DVR) Is Now Available {1410}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Return)