Cylinder Block - Inspect
- 检查缸体有无裂纹和损坏。
- 检查凸轮轴轴承是否磨损。 如果需要一个新轴承，使用适当的接头将轴承压出轴承孔。 确保新轴承中的油孔朝向缸体前部。 轴承中的油孔必须与缸体中的油孔对齐。 轴承必须与凹进面对齐。
Caterpillar Information System:
3126B and 3126E On-highway Engines Remote PTO Accelerator Position Sensor Circuit - Test
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Return)
2002/10/01 New Digital Voltage Regulator (DVR) Is Now Available {1410}
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Engine Valve Lash - Inspect/Adjust
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injection Actuation Pressure - Test
C7 Engines for Combat and Tactical Vehicles Wait To Start Lamp Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed Circuit - Calibrate
C9 Urban Transit Bus Engine Vehicle Speed and Speedometer Circuit - Test
C7 and C9 On-Highway Engines Wastegate Solenoid - Test
C9 Urban Transit Bus Engine Powertrain Data Link Circuit - Test
C-15 and C-16 Industrial Engines Electronic Control Module - Remove and Install
G3520C and G3520E Generator Set Engines Fuel System Operation
C7 and C9 On-Highway Engines Sensors and Electrical Connectors
C-10, C-12, C-15 and C-16 Industrial Engines CID 0022 FMI 13 Timing Sensor calibration required
PMG3516 Power Module Overhaul (In-Frame)
C4.4 (Mech) Industrial Engine Gear Group - Inspect
C7 and C9 On-Highway Engines Data Link Parameters
3054E Industrial Engine Crankcase Breather
3054E Industrial Engine Fan Drive
C-15, C-16, and C-18 Engines Fuel System
3512B Marine Auxiliary Engine Inspecting Electrical Connectors
C9 On-highway Engines Gauges and Indicators
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0174-03 Fuel Temperature voltage high (13)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0174-04 Fuel Temperature voltage low (13)