Turbocharger - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-3931     | Anti-Seize Compound     | -     |
- Inspect the condition of the gasket between the turbocharger and the exhaust manifold and the O-ring seals. Replace the O-ring seals and the gaskets, if necessary.
- Place clean engine oil in the oil supply port of the turbocharger prior to installation. The oil will provide lubrication during starting and protection during storage.
Show/hide table
Illustration 1 | g01006295 |
Note: Refer to the Specifications Manual for the tightening procedure of the clamps on specific turbochargers.
- Apply Tooling (A) to the turbocharger mounting studs on the exhaust manifold.
- Install turbocharger (1) and gasket (12) on the exhaust manifold. Install nuts (13) . Tighten the nuts to a torque of 54 N·m (40 lb ft).
Note: Discard the nuts after use. Use new nuts for installation.
- Place the gasket and the O-ring seal on oil drain tube assembly (9) .
Show/hide table
Illustration 2 | g01006294 |
- Install oil drain tube assembly (9) with bolts (4) and the washers.
- Install bolts (10) and the washers.
- Install oil supply tube assembly (2) and the gasket on turbocharger (1) . Install bolts (3) .
- Connect fitting (11) .
- Install clamp (6) . Secure clamp (6) with bolts (5) .
- Install hose assembly (7) onto the tube. Secure the hose assembly with hose clamp (8) .
Caterpillar Information System:
C-15 On-Highway Engine Turbocharger - Remove
C-15 On-Highway Engine Modulating Valve - Remove and Install
3054E and 3056E Industrial Engines Fuel System - Prime
3054E and 3056E Industrial Engines Maintenance Interval Schedule
3056E Industrial Engine Valve Depth - Inspect
2002/09/01 Proper Installation of Exhaust Manifolds {1059}
3054E and 3056E Industrial Engines Cold Weather Operation
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
C9 Urban Transit Bus Engine Turbocharger
G3612 and G3616 Engines Turbocharger
2002/08/01 The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors {5927}
C-10 and C-12 Truck Engines Basic Engine
C-10 and C-12 On-Highway Engines Turbocharger - Remove
C-10 and C-12 On-Highway Engines Turbocharger - Install
2002/08/12 A Summary of Revisions Will Start to Appear In Disassembly And Assembly Revisions {1000, 7000}
G3306 Engine Safety Messages
3054E and 3056E Industrial Engines Fuel System - Prime
C-15 On-Highway Engine Fuel System
3056E Industrial Engine Fuel Injection
PMG3516 Power Module Safety Messages
PMG3516 Power Module Additional Messages
G3612 and G3616 Engines Prechamber
G3612 and G3616 Engines Prechamber
3054E and 3056E Industrial Engines Starting the Engine