Turbocharger
Show/hide table
Illustration 1 | g00859291 |
Show/hide table
Illustration 2 | g00509170 |
Note: The oil supply and the oil drain holes should be in the vertical position with respect to the engine when the turbocharger is attached to the exhaust manifold.
(1) Clamps
- Tighten the clamp for the turbine housing to the following torque. ... 14 ± 1 N·m (10.0 ± 1.0 lb ft)
- Tighten the clamp for the compressor housing to the following torque. ... 10.2 ± 0.7 N·m (7.52 ± 0.52 lb ft)
(2) Wastegate
- Opening pressure of the wastegate ... 152 kPa (22.0 psi)
Note: Apply 5P-3931 Anti-Seize Compound to the stud threads on the exhaust manifold before assembly of the turbocharger.
Tighten the nuts that fasten the turbocharger to the exhaust manifold to the following torque. ... 54 ± 5 N·m (40 ± 4 lb ft)
Caterpillar Information System:
G3612 and G3616 Engines Turbocharger
2002/08/01 The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors {5927}
C-10 and C-12 Truck Engines Basic Engine
C-10 and C-12 On-Highway Engines Modulating Valve - Remove and Install
C-10 and C-12 On-Highway Engines Fuel Recirculation Valve - Remove and Install
G3520B Engines Cat Data Link
C9 On-highway Engine Cylinder Head
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
3408B and 3408C Industrial and Marine Engines Aftercooler
C-10, C-12 and C-15 On-highway Engines Engine Wiring Harness Diagram
C9 On-highway Engines Sensors and Electrical Components
C-15 On-Highway Engine Piston Ring Groove - Inspect
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
3054E and 3056E Industrial Engines Cold Weather Operation
2002/09/01 Proper Installation of Exhaust Manifolds {1059}
3056E Industrial Engine Valve Depth - Inspect
3054E and 3056E Industrial Engines Maintenance Interval Schedule
3054E and 3056E Industrial Engines Fuel System - Prime
C-15 On-Highway Engine Modulating Valve - Remove and Install
C-15 On-Highway Engine Turbocharger - Remove
C-15 On-Highway Engine Turbocharger - Install
C-10 and C-12 On-Highway Engines Turbocharger - Remove
C-10 and C-12 On-Highway Engines Turbocharger - Install
2002/08/12 A Summary of Revisions Will Start to Appear In Disassembly And Assembly Revisions {1000, 7000}