Valve Mechanism Cover
Show/hide table
 | |
| 图 1 | g01061297 |
气门盖底座 | |
将气门盖底座螺栓按图中所示顺序拧紧 1。
Show/hide table
 | |
| 图 2 | g00728341 |
气门机构罩 | |
注: 某些发动机在气门机构罩处可能装有机油滤清器盖。
将气门机构罩螺栓按图中所示顺序 2拧紧至下述扭矩。 ... 15 ± 3 N·m (11 ± 2 lb ft)
注: 气门盖密封在装配时需进行切割。 为密封接头涂抹一层 3S-6252 密封剂 。
Caterpillar Information System:
3408B and 3408C Industrial and Marine Engines Aftercooler
C-10, C-12 and C-15 On-highway Engines Engine Wiring Harness Diagram
C9 On-highway Engines Sensors and Electrical Components
C-15 On-Highway Engine Piston Ring Groove - Inspect
C-10, C-12 and C-15 On-highway Engines 0100-11 Very Low Oil Pressure (46)
C-10, C-12 and C-15 On-highway Engines 0100-01 Low Oil Pressure Warning (46)
3408E and 3412E Industrial Engines Turbocharger
3406E and C15 Marine Engines Circuit Breakers
C-15, C-16, and C-18 Engines Cooling System - Check - Overheating
C-15, C-16, and C-18 Engines Compression - Test
C-15 On-Highway Engine Troubleshooting
C-15 On-Highway Engine Turbocharger - Inspect
C9 On-highway Engine Cylinder Head
G3520B Engines Cat Data Link
C-10 and C-12 On-Highway Engines Fuel Recirculation Valve - Remove and Install
C-10 and C-12 On-Highway Engines Modulating Valve - Remove and Install
C-10 and C-12 Truck Engines Basic Engine
2002/08/01 The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors {5927}
G3612 and G3616 Engines Turbocharger
C9 Urban Transit Bus Engine Turbocharger
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
3054E and 3056E Industrial Engines Cold Weather Operation
2002/09/01 Proper Installation of Exhaust Manifolds {1059}
3056E Industrial Engine Valve Depth - Inspect