Fuel Recirculation Valve - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolt (5). Remove clamp (4) .
Show/hide table
 | |
| Illustration 1 | g00912217 |
- Disconnect tube assembly (1) from fuel recirculation valve (2) .
- Disconnect hose assembly (3) from fuel recirculation valve (2) .
- Remove fuel recirculation valve (2) .
Installation Procedure
- Connect fuel recirculation valve (2) to tube assembly (1) .
Show/hide table
| | |
| Illustration 2 | g00912217 |
- Connect hose assembly (3) to fuel recirculation valve (2).
- Install clamp (4). Secure clamp (4) with bolt (5) .
Caterpillar Information System:
G3520B Engines Cat Data Link
C9 On-highway Engine Cylinder Head
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
3408B and 3408C Industrial and Marine Engines Aftercooler
C-10, C-12 and C-15 On-highway Engines Engine Wiring Harness Diagram
C9 On-highway Engines Sensors and Electrical Components
C-15 On-Highway Engine Piston Ring Groove - Inspect
C-10, C-12 and C-15 On-highway Engines 0100-11 Very Low Oil Pressure (46)
C-10, C-12 and C-15 On-highway Engines 0100-01 Low Oil Pressure Warning (46)
3408E and 3412E Industrial Engines Turbocharger
3406E and C15 Marine Engines Circuit Breakers
C-15, C-16, and C-18 Engines Cooling System - Check - Overheating
C-10 and C-12 On-Highway Engines Modulating Valve - Remove and Install
C-10 and C-12 Truck Engines Basic Engine
2002/08/01 The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors {5927}
G3612 and G3616 Engines Turbocharger
C9 Urban Transit Bus Engine Turbocharger
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
3054E and 3056E Industrial Engines Cold Weather Operation
2002/09/01 Proper Installation of Exhaust Manifolds {1059}
3056E Industrial Engine Valve Depth - Inspect
3054E and 3056E Industrial Engines Maintenance Interval Schedule
3054E and 3056E Industrial Engines Fuel System - Prime
C-15 On-Highway Engine Modulating Valve - Remove and Install