3408E and 3412E Industrial Engines Caterpillar


Turbocharger

Usage:

3412E 4CR



Illustration 1g00677653

Typical example

(1) V-band clamps

Tighten the V-band clamps to the following torque. ... 14.0 ± 1.0 N·m (10 ± 1 lb ft)
Gently tap around the V-band clamp with a soft faced hammer. Tighten the V-band clamps again. Torque the clamps to the following value. ... 14.0 ± 1.0 N·m (10 ± 1 lb ft)

Apply 5P-3931 Anti-Seize Compound on the washer face and the bolt threads of the exhaust manifold before assembly. Tighten the bolts and nuts that hold the turbocharger to the exhaust manifold to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.