C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Caterpillar


Connecting Rod - Inspect

Usage:

CB-214E 214
本步骤用来确定连杆的下述特点:

  • 连杆扭曲度

  • 连杆孔的平行度


图 1g00690891
检查连杆平行度。
(1) 测量销
(2) 连杆
(A) 测量自连杆的距离 100 mm (3.94 inch)
(B) 测量活塞销轴承孔与连杆轴承孔的中心距。

  1. 使用适当的工具测量连杆 (2) 的距离。

    • 适当的距离测量仪

    • 测量销 (1)

    注: 进行测量之前应先卸下连杆轴承。

  2. 测量连杆扭曲度和两个孔的平行度。

    必须在距离 (A) 处进行测量。 连杆两侧的距离 (A) 数值为 100 mm (3.94 inch)

    测量长度 (B)。

    各侧之间长度 (B) 的测量值总差变化不得超过 ± 0.08 mm (± 0.0031 inch)

  3. 检查活塞销轴承和活塞销有无磨损和其它损坏。

  4. 测量活塞销在活塞销轴承中的间隙。 有关间隙尺寸的信息,请参阅技术规格, "连杆"。

Caterpillar Information System:

797 Off-Highway Truck Hydraulic System Screen (Hoist)
C-10, C-12 and C-15 On-highway Engines 0110-00 High Coolant Temperature Warning (61)
C-10, C-12 and C-15 On-highway Engines 0110-11 Very High Coolant Temperature (61)
2002/08/01 The Routing Has Been Changed For The New Vent Line In The Oil Level Regulator Groups {1334}
G3500B Engines Crankshaft Position for Valve Lash Setting
2002/08/01 Guidelines for Water Pump Visual Inspection {1361}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System
797 and 797B Off-Highway Truck Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C-18 Truck Engines Customer Specified Parameters
C-15 Truck Engine Electric Starting Motor
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
C-18 Truck Engines Engine Operation
C-15 On-Highway Engine Air Inlet and Exhaust System
C-15 On-Highway Engine Basic Engine
C-15 On-Highway Engine Electronic Control System Components
C-15, C-16, and C-18 Engines Finding Top Center Position for No. 1 Piston
C-15, C-16, and C-18 Engines Fuel System Pressure - Test
C-15 On-Highway Engine Air Inlet and Exhaust System - Inspect
C-15 On-Highway Engine Turbocharger - Inspect
C-15 On-Highway Engine Troubleshooting
C-15, C-16, and C-18 Engines Compression - Test
C-15, C-16, and C-18 Engines Cooling System - Check - Overheating
3406E and C15 Marine Engines Circuit Breakers
3408E and 3412E Industrial Engines Turbocharger
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.