Turbocharger - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (3).
Show/hide table
 | |
| Illustration 1 | g01006294 |
- Remove bolts (5). Remove clamp (6) .
- Disconnect fitting (11). Remove oil supply tube assembly (2) and the gasket.
- Remove bolts (4). Remove bolts (10).
- Remove oil drain tube assembly (9). Remove the O-ring seal and the gasket from oil drain tube assembly (9) .
- Move hose clamp (8). Remove hose assembly (7) .
- Remove nuts (13) .
Show/hide table
 | |
| Illustration 2 | g01006295 |
- Remove turbocharger (1) and gasket (12) from the exhaust manifold.
Caterpillar Information System:
C-15 On-Highway Engine Modulating Valve - Remove and Install
3054E and 3056E Industrial Engines Fuel System - Prime
3054E and 3056E Industrial Engines Maintenance Interval Schedule
3056E Industrial Engine Valve Depth - Inspect
2002/09/01 Proper Installation of Exhaust Manifolds {1059}
3054E and 3056E Industrial Engines Cold Weather Operation
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
C9 Urban Transit Bus Engine Turbocharger
G3612 and G3616 Engines Turbocharger
2002/08/01 The Standard 3 Phase Voltages That Are Available Have Changed For Options That Are Driven By Electric Motors {5927}
C-10 and C-12 Truck Engines Basic Engine
C-10 and C-12 On-Highway Engines Modulating Valve - Remove and Install
C-15 On-Highway Engine Turbocharger - Install
C-10 and C-12 On-Highway Engines Turbocharger - Remove
C-10 and C-12 On-Highway Engines Turbocharger - Install
2002/08/12 A Summary of Revisions Will Start to Appear In Disassembly And Assembly Revisions {1000, 7000}
G3306 Engine Safety Messages
3054E and 3056E Industrial Engines Fuel System - Prime
C-15 On-Highway Engine Fuel System
3056E Industrial Engine Fuel Injection
PMG3516 Power Module Safety Messages
PMG3516 Power Module Additional Messages
G3612 and G3616 Engines Prechamber
G3612 and G3616 Engines Prechamber