PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE HARNESS INSTALLATION ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS
Usage:
REBE6201-00
Show/hide table
| 20Jan2011 |
U-27
A-20
D-27
O-27
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE HARNESS INSTALLATION ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS |
|
| 1408 1403 | PS43224 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43224" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jan2013 |
PROBLEM
Show/hide table
| The 125-OR eletrical wire, which is part of the 300-6443 Engine Harness Assembly, is conected to the glow plug incorrectly on certain 938H Wheel Loaders and IT38H Integrated Toolcarriers. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 938H | JKM00151-00778 |
| IT38H | JNJ00151-00379 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Refer to the attached Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| 1) Incorrect Assembly The wire 125-OR terminal was assembled on the wrong clamp bolt |
 |
| Image1.1.1 |
| 2) Correct Assembly The wire 125-OR terminal must be assembled on the same clamp as pre-heating wire. |
 |
| Image1.2.1 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HID LIGHTS ON CERTAIN D8T, D9T, D10R, D10T, D11R, D11R CD, D11T, AND D11T CD TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HID LIGHTS ON CERTAIN D8T, D9T, D10R, D10T, D11R, D11R CD, D11T, AND D11T CD TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB POST ASSEMBLY ON CERTAIN D6K TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB POST ASSEMBLY ON CERTAIN D6K TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CUSHION HITCH HARNESS ON CERTAIN 657G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CUSHION HITCH HARNESS ON CERTAIN 657G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TILT SWITCH IN THE LEFT-HAND CONTROL GROUP ON CERTAIN 953D, 963D, AND 973D TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TILT SWITCH IN THE LEFT-HAND CONTROL GROUP ON CERTAIN 953D, 963D, AND 973D TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTS FOR THE FUEL WATER SEPARATOR AND RELOCATING THE SWITCH FOR THE FUEL WATER SEPARATOR ON CERTAIN D11T AND D11T C/D TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTS FOR THE FUEL WATER SEPARATOR AND RELOCATING THE SWITCH FOR THE FUEL WATER SEPARATOR ON CERTAIN D11T AND D11T C/D TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REINFORCING FRONT LOADER FRAME STRUCTURE AT THE "A" PIN ON CERTAIN 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REINFORCING FRONT LOADER FRAME STRUCTURE AT THE "A" PIN ON CERTAIN 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON ROD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON ROD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVELINE BOLTS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVELINE BOLTS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BREAKER PANEL ON CERTAIN 950H, 962H, 966H AND 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BREAKER PANEL ON CERTAIN 950H, 962H, 966H AND 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE AIR BAFFLE GROUP ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE AIR BAFFLE GROUP ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB MOUNTS ON CERTAIN 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB MOUNTS ON CERTAIN 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING A HYDRAULIC PILOT HOSE ON CERTAIN D11T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING A HYDRAULIC PILOT HOSE ON CERTAIN D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM TO INSPECT AND REPAIR WINDSHIELD WASHER FLUID LEAKS ON CERTAIN 953D, 963D AND 973D TRACK LOADERS PRODUCT SUPPORT PROGRAM TO INSPECT AND REPAIR WINDSHIELD WASHER FLUID LEAKS ON CERTAIN 953D, 963D AND 973D TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, THE 185-6250 NIPPLE ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, THE 185-6250 NIPPLE ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 296-4301 MIDSHIP SUPPORT BEARING ASSEMBLY WITH PLUGGED FITTING HOLE ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 296-4301 MIDSHIP SUPPORT BEARING ASSEMBLY WITH PLUGGED FITTING HOLE ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-5841 TRANSMISSION CONTROL ON CERTAIN 924H, 924HZ, 928H, AND 930H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-5841 TRANSMISSION CONTROL ON CERTAIN 924H, 924HZ, 928H, AND 930H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN AIR PRESSURE SENSOR ON THE AIR CLEANER ON CERTAIN 973D TRACK LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN AIR PRESSURE SENSOR ON THE AIR CLEANER ON CERTAIN 973D TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 176-5459 BUCKET POSITIONER SWITCH ON CERTAIN 938GII, 938H, AND 994F WHEEL LOADERS, AND IT38GII, IT38H, AND IT62H INTEGRATED TOOL CARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 176-5459 BUCKET POSITIONER SWITCH ON CERTAIN 938GII, 938H, AND 994F WHEEL LOADERS, AND IT38GII, IT38H, AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 9G1919 PLANETARY GEARS IN DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 9G1919 PLANETARY GEARS IN DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STEERING COLUMN ON CERTAIN 980G, 980G SERIES II, AND 980H WHEEL LOADERS THAT ARE EQUIPPED WITH THE UNDERGROUND MINING ARRANGEMENT (UMA) PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STEERING COLUMN ON CERTAIN 980G, 980G SERIES II, AND 980H WHEEL LOADERS THAT ARE EQUIPPED WITH THE UNDERGROUND MINING ARRANGEMENT (UMA)
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7C7677 AND 7C7678 FUEL LINE TUBES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7C7677 AND 7C7678 FUEL LINE TUBES FROM DEALER PARTS STOCK