PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 9G1919 PLANETARY GEARS IN DEALER PART STOCK
Usage:
REBE6247-00
Show/hide table
| 16Jun2010 |
U-209
A-164
D-182
O-186
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 9G1919 PLANETARY GEARS IN DEALER PART STOCK |
|
| 7750 | PI70346 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2010 |
PROBLEM
Show/hide table
| 9G1919 Planetary Gears in dealer part stock need to be inspected. Some of these 9G1919 Planetary Gears have missed the final gear tooth grind operations. Gears that missed the grind operation will need to be removed from dealer parts stock. |
ACTION REQUIRED
Show/hide table
| Inspect all 9G1919 Planetary Gears in dealer parts stock. Image 1 below shows a good gear on the left and non-conforming gear on the right. The finish ground part on the left is clearly shinier and shows horizontal grinder finish compared to the non-ground gear on the right that still shows the hob scallops. Gears that missed the grind operation need to be removed from dealer parts stock. In order to facilitate the tracking and containment of these gears, contact Transmission Product Support with the total number of gears found that have not been properly finished as soon as possible. Contact Transmission Product Support at one of the following numbers: Randy Gallinger: 309-675-7790 Gary Hodskins: 309-494-2546 Joel Miller: 309-675-2398 |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| "Send It Back" will generate a Parts Return Request (PRR) for all 9G1919 Planetary Gears for NACD Dealers. LACD, EAME, and APD dealers will need to return the 9G1919 Planetary Gears according to their normal warranty return procedures. All Dealers will need to return the 9G1919 Planetary Gears that have not been properly finished to the following address: Caterpillar, Inc. East Peoria Plant Attn.: Gary Hodskins BLDG KK, Dock 57, Location KK-38-Q 100 Tractor Drive East Peoria, IL 61630 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 176-5459 BUCKET POSITIONER SWITCH ON CERTAIN 938GII, 938H, AND 994F WHEEL LOADERS, AND IT38GII, IT38H, AND IT62H INTEGRATED TOOL CARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 176-5459 BUCKET POSITIONER SWITCH ON CERTAIN 938GII, 938H, AND 994F WHEEL LOADERS, AND IT38GII, IT38H, AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN AIR PRESSURE SENSOR ON THE AIR CLEANER ON CERTAIN 973D TRACK LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN AIR PRESSURE SENSOR ON THE AIR CLEANER ON CERTAIN 973D TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-5841 TRANSMISSION CONTROL ON CERTAIN 924H, 924HZ, 928H, AND 930H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-5841 TRANSMISSION CONTROL ON CERTAIN 924H, 924HZ, 928H, AND 930H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 296-4301 MIDSHIP SUPPORT BEARING ASSEMBLY WITH PLUGGED FITTING HOLE ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 296-4301 MIDSHIP SUPPORT BEARING ASSEMBLY WITH PLUGGED FITTING HOLE ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, THE 185-6250 NIPPLE ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, THE 185-6250 NIPPLE ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM TO INSPECT AND REPAIR WINDSHIELD WASHER FLUID LEAKS ON CERTAIN 953D, 963D AND 973D TRACK LOADERS PRODUCT SUPPORT PROGRAM TO INSPECT AND REPAIR WINDSHIELD WASHER FLUID LEAKS ON CERTAIN 953D, 963D AND 973D TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING A HYDRAULIC PILOT HOSE ON CERTAIN D11T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING A HYDRAULIC PILOT HOSE ON CERTAIN D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB MOUNTS ON CERTAIN 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB MOUNTS ON CERTAIN 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE AIR BAFFLE GROUP ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE AIR BAFFLE GROUP ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE HARNESS INSTALLATION ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE HARNESS INSTALLATION ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HID LIGHTS ON CERTAIN D8T, D9T, D10R, D10T, D11R, D11R CD, D11T, AND D11T CD TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HID LIGHTS ON CERTAIN D8T, D9T, D10R, D10T, D11R, D11R CD, D11T, AND D11T CD TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STEERING COLUMN ON CERTAIN 980G, 980G SERIES II, AND 980H WHEEL LOADERS THAT ARE EQUIPPED WITH THE UNDERGROUND MINING ARRANGEMENT (UMA) PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STEERING COLUMN ON CERTAIN 980G, 980G SERIES II, AND 980H WHEEL LOADERS THAT ARE EQUIPPED WITH THE UNDERGROUND MINING ARRANGEMENT (UMA)
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7C7677 AND 7C7678 FUEL LINE TUBES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7C7677 AND 7C7678 FUEL LINE TUBES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DESIGNATED HYDRAULIC OIL COOLING SYSTEM ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DESIGNATED HYDRAULIC OIL COOLING SYSTEM ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RING GEAR AND FINAL DRIVE BEARINGS ON CERTAIN D6T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RING GEAR AND FINAL DRIVE BEARINGS ON CERTAIN D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE HOUSING ASSEMBLY ON CERTAIN 993K LARGE WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE HOUSING ASSEMBLY ON CERTAIN 993K LARGE WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LADDER HINGE HOUSING ON CERTAIN D11T TRACK-TYPE TRACTORS EQUIPPED WITH ACCESS LADDERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LADDER HINGE HOUSING ON CERTAIN D11T TRACK-TYPE TRACTORS EQUIPPED WITH ACCESS LADDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL CARRIER BEARINGS ON CERTAIN 993K LARGE WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL CARRIER BEARINGS ON CERTAIN 993K LARGE WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE HIGH TEMPERATURE SLEEVING ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE HIGH TEMPERATURE SLEEVING ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIP SEAL AND OTHER INTEGRAL COMPONENTS OF THE POWER TRANSMISSION ON CERTAIN 994F WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIP SEAL AND OTHER INTEGRAL COMPONENTS OF THE POWER TRANSMISSION ON CERTAIN 994F WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE AIR INLET ELBOW ON CERTAIN 973C TRACK-TYPE LOADERS THAT ARE EQUIPPED WITH STEEL MILL ARRANGEMENT PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING, IF NECESSARY, THE AIR INLET ELBOW ON CERTAIN 973C TRACK-TYPE LOADERS THAT ARE EQUIPPED WITH STEEL MILL ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL COOLER SUPPORT BRACKET ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL COOLER SUPPORT BRACKET ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE SPROCKET HUB ON CERTAIN 963D TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE SPROCKET HUB ON CERTAIN 963D TRACK-TYPE LOADERS