Piston Height - Inspect
简介
如果活塞高于缸体顶面的高度不符合技术规格, "活塞和活塞环"中给出的公差，必须更换活塞和活塞销轴承。 如果更换或重新机加工过以下任一部件，则必须测量活塞高于缸体顶面的高度：
- 曲轴
- 缸盖
- 连杆
- 活塞销轴承
- 活塞
必须保持适当的活塞高度才能确保发动机符合排放标准的要求。
注: 活塞顶部不应进行机加工。 如果安装的是原来的活塞，确保将原来的活塞组装到正确的连杆上并安装到原来的气缸中。
所需工具
Show/hide table
| 所需工具 | ||
| 零件号 | 零件名称 | 数量 |
| 8T-0455 | 缸套凸出量工具总成 | 1 |
检查步骤
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Cylinder Liner Projection - Inspect
G3600 Engines Engine Sensors - In-Line
C4.4 (Mech) Industrial Engine Connecting Rod - Inspect
797F Off-Highway Truck Steering System Oil Filter (Hydraulic Fan, Steering)
3408E and 3412E Industrial Engines Flash Programming
2002/06/01 Restoring The Original Software Configuration On The 203-7810 Engine Monitoring Control Gp And The 203-7811 Engine Monitoring Control Gp {7620}
797F Off-Highway Truck Steering System Metering Pump (Steering)
797F Off-Highway Truck Steering System Steering Control Valve
797F Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
2002/06/03 Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
797F Off-Highway Truck Steering System Piston Pump (Steering)
G3600 Engines Air Lines - Air Choke
G3600 Engines Air Inlet and Exhaust System
G3600 Engines Lubrication System
G3600 Engines Cooling System
G3600 Engines Basic Block
3412E, C30 and C32 Marine Engines Flash Programming
3054 and 3056 Industrial and Generator Set Engines Fuel Shutoff Solenoid
2002/06/01 New Unit Injector Rocker Arm Assembly Is Now Used {1123}
2002/09/01 New Integral Seals Are Used In Water Lines Groups {1380}
3056E Industrial Engine Air Inlet and Exhaust System
Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100} Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100}
2002/06/17 New Service Information Tool for CAT Dealers is Now Available {1900}
G3600 Engines Pressure Regulating Valve