New Unit Injector Rocker Arm Assembly Is Now Used {1123}
- Truck Engines:
- 3406E (S/N: 1MM; 2WS; 5DS; 1LW)
- C-15 (S/N: 6NZ)
- C-16 (S/N: 7CZ)
Description of Change: A new unit injector rocker arm assembly is now available. The new unit injector rocker arm assembly provides an increased service life. A smaller jam nut is utilized in the new rocker arm assembly while tightening specifications have not changed.
Adaptable To: The new 207-5248 Rocker Arm replaces the former 162-9174 Rocker Arm and the former 192-8215 Arm As in S/N:6NZ69039-UP
(C-15 Truck Engines) and S/N:7CZ02393-UP
(C-16 Truck Engines). The former 162-9174 Rocker Arm and the former 192-8215 Arm As have been cancelled. The new 207-5248 Rocker Arm is adaptable to all of the above engines. The following parts must be used in conjunction with the 207-5248 Rocker Arm :
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Fuel Shutoff Solenoid
3412E, C30 and C32 Marine Engines Flash Programming
G3600 Engines Basic Block
G3600 Engines Cooling System
G3600 Engines Lubrication System
G3600 Engines Air Inlet and Exhaust System
3046 Engine for Caterpillar Built Machines Piston Height - Inspect
3054 and 3056 Industrial and Generator Set Engines Cylinder Liner Projection - Inspect
G3600 Engines Engine Sensors - In-Line
C4.4 (Mech) Industrial Engine Connecting Rod - Inspect
797F Off-Highway Truck Steering System Oil Filter (Hydraulic Fan, Steering)
3408E and 3412E Industrial Engines Flash Programming
2002/09/01 New Integral Seals Are Used In Water Lines Groups {1380}
3056E Industrial Engine Air Inlet and Exhaust System
Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100} Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100}
2002/06/17 New Service Information Tool for CAT Dealers is Now Available {1900}
G3600 Engines Pressure Regulating Valve
3056E Industrial Engine Lubrication System
G3516B Engines Electrohydraulic System Oil Pressure (Low)
PM820, PM822, and PM825 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
G3516B Engines MID 036 - CID 1759 - FMI 08 Exhaust Back Pressure Sensor signal abnormal
PMG3516 Power Module Generator Set - Test
3034 Marine Engine Auxiliary Water Pump
3306B Generator Set Space Heater - Check