Auxiliary Water Pump
Show/hide table
 | |
| Illustration 1 | g00897674 |
(1) Tighten the nuts that fasten the auxiliary water pump to the front housing to the following torque.
- M8 ... 22 N·m (16 lb ft)
- M10 ... 45 N·m (33 lb ft)
Caterpillar Information System:
PMG3516 Power Module Generator Set - Test
G3516B Engines MID 036 - CID 1759 - FMI 08 Exhaust Back Pressure Sensor signal abnormal
PM820, PM822, and PM825 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
G3516B Engines Electrohydraulic System Oil Pressure (Low)
3056E Industrial Engine Lubrication System
G3600 Engines Pressure Regulating Valve
2002/06/17 New Service Information Tool for CAT Dealers is Now Available {1900}
Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100} Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100}
3056E Industrial Engine Air Inlet and Exhaust System
2002/09/01 New Integral Seals Are Used In Water Lines Groups {1380}
2002/06/01 New Unit Injector Rocker Arm Assembly Is Now Used {1123}
3054 and 3056 Industrial and Generator Set Engines Fuel Shutoff Solenoid
3306B Generator Set Space Heater - Check
2002/07/01 Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
3034 Marine Engine Glow Plugs
3034 Marine Engine Fuel Shutoff Solenoid
G3600 Engines Air/Fuel Pressure Module - Test
G3600 Engines Air Lines - Air Choke with TPS Turbocharger
C-10, C-12 and C-15 On-Highway Engines Ordering Replacement Parts
3034 Marine Engine Alternator and Regulator
C-10, C-12 and C-15 On-Highway Engines Reference Material
3056E Industrial Engine Turbocharger - Inspect
C18 Generator Set Fuel System - Prime
2002/07/01 3500B Marine Engine Data Link Usage {7600}