Fuel Shutoff Solenoid
Show/hide table
 | |
| Illustration 1 | g00897849 |
Pull-in current ... 9.5 amperes
Voltage ... 12 Volts
(1) Tighten the bolts that secure the fuel shutoff solenoid to the fuel injection pump to the following torque. ... 9 N·m (80 lb in)
(2) Gasket
Note: Ensure that the gasket is replaced during the installation of the fuel shutoff solenoid.
Caterpillar Information System:
3034 Marine Engine Glow Plugs
2002/07/01 Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
3306B Generator Set Space Heater - Check
3034 Marine Engine Auxiliary Water Pump
PMG3516 Power Module Generator Set - Test
G3516B Engines MID 036 - CID 1759 - FMI 08 Exhaust Back Pressure Sensor signal abnormal
PM820, PM822, and PM825 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
G3516B Engines Electrohydraulic System Oil Pressure (Low)
3056E Industrial Engine Lubrication System
G3600 Engines Pressure Regulating Valve
2002/06/17 New Service Information Tool for CAT Dealers is Now Available {1900}
Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100} Installation Procedure for the 206-7745 Cylinder Head Group or the 223-6523 Cylinder Head Group {1100}
G3600 Engines Air/Fuel Pressure Module - Test
G3600 Engines Air Lines - Air Choke with TPS Turbocharger
C-10, C-12 and C-15 On-Highway Engines Ordering Replacement Parts
3034 Marine Engine Alternator and Regulator
C-10, C-12 and C-15 On-Highway Engines Reference Material
3056E Industrial Engine Turbocharger - Inspect
C18 Generator Set Fuel System - Prime
2002/07/01 3500B Marine Engine Data Link Usage {7600}
3056E Industrial Engine Air Inlet Heater - Test
C9.3 Marine Propulsion Engine Engine Air Cleaner Element - Clean/Replace
G3520B Engines System Overview
Machine Security System MID 124 - CID 0168 - FMI 00