Hydraulic Tank and Filter - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 4 |
- Attach Tooling (A) and position hydraulic oil tank and filter (23) into the machine.
Show/hide table
Illustration 2 g06132162 - Install bolts (24).
Show/hide table
Illustration 3 g06132160 - Remove Tooling (A) from hydraulic oil tank and filter (23).
Show/hide table
Illustration 4 g06132157 - Install hose (22) and clamps (21).
Show/hide table
Illustration 5 g06132155 - Connect elbow assembly (20). Install clamps (19).
Show/hide table
Illustration 6 g06132152 - Connect hose assembly (18).
Show/hide table
Illustration 7 g06132149 - Connect hose assembly (17).
Show/hide table
Illustration 8 g06132147 - Connect wire harness assemblies (16) and (15).
Show/hide table
Illustration 9 g06132139 - Position hose assemblies (14) and install bolt (13).
Show/hide table
Illustration 10 g01330700 - Position filter assembly (11) and install bolts (12).
Show/hide table
Illustration 11 g01330699 - Install panel (10).
Show/hide table
Illustration 12 g01330698 - Install panel (9).
Show/hide table
Illustration 13 g01330729 - Install panel (8) and bolts (7).
Show/hide table
Illustration 14 g01330728 - Close side access door (6).
Show/hide table
Illustration 15 g01330727 - Install bolts (5).
Show/hide table
Illustration 16 g01330421 - Install cover (4).
Show/hide table
Illustration 17 g01330420 - Install step (3).
Show/hide table
Illustration 18 g01330419 Show/hide tableIllustration 19 g01330418 - Install bottom guards (2) and (1).
- Fill the hydraulic oil tank.
Show/hide table
Illustration 1 | g06132164 |
Caterpillar Information System:
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Remove
M325D MH Material Handler Axle Oil Sample - Obtain
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Connect
G3512 Generator Set Engine Water Temperature Regulators - Remove
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
329F and 330F Excavators Warning Categories
329F and 330F Excavators Symbols
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
349F and 352F Excavators Machine System Specifications Piston Pump
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Separate
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Install
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
G3512 Generator Set Engine Water Temperature Regulators - Install
G3500H Generator Set Engine Data Link - Test
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track Carrier Roller - Remove and Install
326D2 and 330D2 Excavator Machine System Electronic Control Module
G3500H Generator Set Engine Detonation - Test
730C2 and 725C2 Articulated Truck Power Train Rear Axle - Remove and Install
352F Mobile Hydraulic Power Unit (MHPU) Machine System Hood
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Front Idler and Recoil Spring - Install
G3512 Generator Set Engine Water Pump - Install