Hydraulic Tank and Filter - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 4 |
- Drain the hydraulic oil into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g01330418 Show/hide tableIllustration 2 g01330419 - Remove bottom guards (1) and (2).
Show/hide table
Illustration 3 g01330420 - Remove step (3).
Show/hide table
Illustration 4 g01330421 - Remove cover (4).
Show/hide table
Illustration 5 g01330727 - Remove bolts (5).
Show/hide table
Illustration 6 g01330728 Show/hide tableIllustration 7 g01330729 - Open side access door (6). Remove bolts (7) and panel (8).
Show/hide table
Illustration 8 g01330698 - Remove panel (9).
Show/hide table
Illustration 9 g01330699 - Remove panel (10).
Show/hide table
Illustration 10 g01330700 - Remove bolts (12) and place filter assembly (11) to the side.
Show/hide table
Illustration 11 g06132139 Show/hide tableIllustration 12 g06132147 - Remove bolt (13) and place hose assemblies (14) to the side. Disconnect wire harness assemblies (15) and (16). Remove cable straps and reposition wire harness to the side.
Show/hide table
Illustration 13 g06132149 - Remove hose assembly (17).
Show/hide table
Illustration 14 g06132152 - Disconnect hose assembly (18).
Show/hide table
Illustration 15 g06132155 - Remove clamps (19) and disconnect elbow assembly (20).
Show/hide table
Illustration 16 g06132157 - Remove clamps (21) and remove hose (22).
Show/hide table
Illustration 17 g06132160 - Attach Tooling (A) and a suitable lifting device to hydraulic oil tank (23). The weight of hydraulic oil tank and filter (23) is approximately
98 kg (216 lb) .Show/hide tableIllustration 18 g06132162 - Remove bolts (24).
Show/hide table
Illustration 19 g06132164 - Remove hydraulic oil tank (23) and the filter.
Caterpillar Information System:
M325D MH Material Handler Axle Oil Sample - Obtain
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Connect
G3512 Generator Set Engine Water Temperature Regulators - Remove
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
329F and 330F Excavators Warning Categories
329F and 330F Excavators Symbols
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
349F and 352F Excavators Machine System Specifications Piston Pump
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Separate
G3512 Generator Set Engine Aftercooler - Assemble
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Install
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Install
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
G3512 Generator Set Engine Water Temperature Regulators - Install
G3500H Generator Set Engine Data Link - Test
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track Carrier Roller - Remove and Install
326D2 and 330D2 Excavator Machine System Electronic Control Module
G3500H Generator Set Engine Detonation - Test
730C2 and 725C2 Articulated Truck Power Train Rear Axle - Remove and Install
352F Mobile Hydraulic Power Unit (MHPU) Machine System Hood
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Front Idler and Recoil Spring - Install