Track - Connect
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 422-8733 | Jack Stand Gp | 3 |
| B | 444-0526 | Manual/Hydraulic Jack Gp | 1 |
- Use a suitable lifting device to place track (1) onto the track roller. Install master pin (2) and cotter pin (3)
Show/hide table
Illustration 2 g03018736 - Remove Tooling (A) and Tooling (B) from under the machine.
Show/hide table
| |
| Illustration 1 | g03018656 |
End By:
- Adjust the track tension. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Caterpillar Information System:
G3512 Generator Set Engine Water Temperature Regulators - Remove
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
329F and 330F Excavators Warning Categories
329F and 330F Excavators Symbols
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
349F and 352F Excavators Machine System Specifications Piston Pump
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Separate
G3512 Generator Set Engine Aftercooler - Assemble
308E2 Mini Hydraulic Excavator Machine System Fuel Lines
Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408} Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408}
M325D MH Material Handler Axle Oil Sample - Obtain
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Remove
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Install
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Install
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
G3512 Generator Set Engine Water Temperature Regulators - Install
G3500H Generator Set Engine Data Link - Test
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track Carrier Roller - Remove and Install
326D2 and 330D2 Excavator Machine System Electronic Control Module
G3500H Generator Set Engine Detonation - Test
730C2 and 725C2 Articulated Truck Power Train Rear Axle - Remove and Install