Water Temperature Regulators - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g06132154 - Remove 4 bolts (1) and (6).
- Remove 5 bolts (2) and remove the water regulator housing.
- Remove 2 bolts (4) from clamp and 2 bolts (5) from flange. Position hose out of the way.
- Remove coupling (3) and position out of the way.
Show/hide table
Illustration 2 g06132163 - Remove seal carrier (7).
Show/hide table
Illustration 3 g06132172 - Remove seal (8).
Show/hide table
Illustration 4 g06132177 - Remove water temperature regulators (9).
Show/hide table
Illustration 5 g06132207 - Remove seal (10).
Caterpillar Information System:
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
329F and 330F Excavators Warning Categories
329F and 330F Excavators Symbols
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
349F and 352F Excavators Machine System Specifications Piston Pump
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Separate
G3512 Generator Set Engine Aftercooler - Assemble
308E2 Mini Hydraulic Excavator Machine System Fuel Lines
Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408} Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408}
A New Fuel Sender Troubleshooting Procedure Is Now Available Certain Mini Excavators {1401, 1402, 1408} A New Fuel Sender Troubleshooting Procedure Is Now Available Certain Mini Excavators {1401, 1402, 1408}
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Connect
M325D MH Material Handler Axle Oil Sample - Obtain
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Remove
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Install
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Install
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
G3512 Generator Set Engine Water Temperature Regulators - Install
G3500H Generator Set Engine Data Link - Test
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track Carrier Roller - Remove and Install
326D2 and 330D2 Excavator Machine System Electronic Control Module
G3500H Generator Set Engine Detonation - Test