Piston Pump
Show/hide table
Illustration 1 | g06132027 |
Show/hide table
Specification for 497-8498 Piston Pump Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | - | 8T-2922 Bolt | Torque to |
2 | - | - | Torque to |
3 | - | 6V-8213 Bolt | Torque to |
4 | - | 3E-8025 Bolt | Torque to |
5 | - | 247-8841 Bolt | Torque to |
Show/hide table
Illustration 2 | g06132036 |
Show/hide table
Item | Qty | Part | Specification Description |
6 | 8 | 252-9167 Bolt | Torque to |
7 | 2 | 451-2184 Nut | Torque to |
8 | 10 | 6V-8200 Bolt | Torque to |
9 | 2 | 242-6914 Servo Piston | Torque to |
10 | 2 | 488-4578 Pin As | Apply adhesive 1305N of threebond to the surface of pin assembly. |
11 | 18 | 295-9506 Spring | Free length is |
12 | 8 | 196-3784 Plug | Torque to |
13 | 2 | 170-9997 Plug | Torque to |
14 | 2 | 242-6918 Nut | Torque to |
15 | 1 | 249-1308 Bolt | Torque to |
16 | - | - | Torque to |
17 | 4 | 7I-8164 Orifice | Torque to |
18 | 4 | 110-5525 Plug | Torque to |
19 | 9 | 249-1306 Bolt | Torque to |
Show/hide table
Illustration 3 | g06132046 |
Show/hide table
Item | Qty | Part | Specification Description |
20 | 11 | 8T-0343 Bolt | Torque to |
21 | - | - | Tighten the flange socket to |
22 | 8 | 8T-9080 Bolt | Torque to |
23 | 2 | 249-1307 Bolt | Torque to |
Show/hide table
Illustration 4 | g06132051 |
497-8514 Solenoid Valve Gp |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
24 | 3 | 8T-2922 Bolt | Torque to |
25 | 1 | 110-5525 Plug | Torque to |
26 | 10 | 7I-8084 Plug | Torque to |
27 | 2 | 7I-2272 Bolt | Torque to |
Caterpillar Information System:
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Separate
G3512 Generator Set Engine Aftercooler - Assemble
308E2 Mini Hydraulic Excavator Machine System Fuel Lines
Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408} Troubleshooting and/or Replacement of the 376-9480 Fuel Sender on Certain Mini Excavators {1401, 1402, 1408}
A New Fuel Sender Troubleshooting Procedure Is Now Available Certain Mini Excavators {1401, 1402, 1408} A New Fuel Sender Troubleshooting Procedure Is Now Available Certain Mini Excavators {1401, 1402, 1408}
308E2 Mini Hydraulic Excavator Machine System Boom Cylinder
308E2 Mini Hydraulic Excavator Machine System Boom Cylinder Lines
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Left Hand
G3512 Generator Set Engine Aftercooler - Disassemble
352F Mobile Hydraulic Power Unit (MHPU) Machine System Swing Gear and Bearing
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
329F and 330F Excavators Symbols
329F and 330F Excavators Warning Categories
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
G3512 Generator Set Engine Water Temperature Regulators - Remove
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Track - Connect
M325D MH Material Handler Axle Oil Sample - Obtain
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Remove
318D2 Excavator Machine Systems Hydraulic Tank and Filter - Install
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
313D2 Excavator Machine Systems Tank and Filter (Hydraulic) - Install
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}