G3300 Engines Caterpillar


Engine Valve Lash - Inspect/Adjust

Usage:

G3306 07Y

------ WARNING! ------

点火系统能造成电击。 操作期间避免接触点火系统的部件和线路。


有关调整发动机气门间隙的步骤,请参阅维修手册, "系统操作 / 测试与调整"。

请咨询本地 Caterpillar 代理商以获得帮助。


注意

只有有资格的维修人员才能进行该项保养工作。对于整个气门间隙调整步骤,请参考维修手册或与卡特彼勒代理商联系。

气门间隙调整不适当的卡特彼勒发动机工作效率会降低。 这样会使燃油消耗量增加和/或缩短发动机部件寿命。


如果气门间隙在公差范围内,则不必调整气门间隙。

如果间隙尺寸不在公差范围内,应进行气门间隙调整。

在发动机冷态时,调整气门间隙。 在发动机停机并取下气门室盖后,可认为发动机处于冷态下。

保养前要防止异物进入气缸盖和配气机构上部。 彻底清洁气门室盖周围的区域。

有关气门间隙的设定值,请参阅操作和保养手册, "发动机描述"专题(产品信息章节)。

Caterpillar Information System:

Electronic Modular Control Panel II (EMCP II) Service Mode
SCT673 Truck Mounted PumperPOD Manual Stop Procedure
Electronic Modular Control Panel II (EMCP II) Shutdown Mode
SCT673 Truck Mounted PumperPOD Power End Oil and Filter - Change
G3300 Engines Plate Locations and Film Locations
G3300 Engines Specifications
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 167-1351 Generator through 167-1354 Generator
Electronic Modular Control Panel II (EMCP II) Data Link
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
Electronic Modular Control Panel II (EMCP II) Starting Motor Remains Engaged (for EUI Engines)
2001/11/01 The Timing Marks Have Been Improved On The Front and Rear Balancer Gears {1220}
C9 Marine Engines Digital Sensor Supply Circuit - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines General Information
Electronic Modular Control Panel II (EMCP II) Hourmeter Programming OP7
SPT343 Truck Mounted Pumper Product Description
3054 and 3056 Industrial and Generator Set Engines Troubleshooting
2002/03/01 A New Cover Assembly Helps Hold The Oil Screen In Place {1302}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Block - Inspect
2001/11/01 A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
3126 Truck Engine (Military) Gear Group (Front) - Time
3126 Truck Engine (Military) Air Inlet and Exhaust System - Inspect
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor
2002/02/01 Turbocharger Compressor Bypass Valve is used on 3616 Engines {1081}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.