G3300 Engines Caterpillar


Specifications

Usage:

G3306 07Y

表 1
G3304 发动机技术规格    
气缸及排列     4
直列式    
吸气     自然吸气式    
缸径    
121 mm (4.75 in)    
冲程    
152 mm (6 in)    
总排量    
7 L (425 cu in)    
点火顺序     1-3-4-2    
旋转方向(飞轮端)     逆时针    
进气阀间隙    
.38 mm (.015 in)    
排气阀间隙    
.76 mm (.030 in)    



图 1g00511194

G3304 发动机设计

(A) 排气阀

(B) 进气阀

表 2
G3306 发动机技术规格    
气缸及排列     6
直列式    
吸气     自然吸气式    
涡轮增压式
带有水套水后冷的涡轮增压式
带有独立后冷却回路的涡轮增压式
缸径    
121 mm (4.75 in)    
冲程    
152 mm (6 in)    
总排量    
10.5 L638 (cu in)    
点火顺序     1-5-3-6-2-4    
旋转方向(飞轮端)     逆时针    
进气阀间隙    
.38 mm (.015 in)    
排气阀间隙    
.76 mm (.030 in)    



图 2g00316303

G3306 发动机设计

(A) 排气阀

(B) 进气阀

Caterpillar Information System:

SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 167-1351 Generator through 167-1354 Generator
Electronic Modular Control Panel II (EMCP II) Data Link
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
Electronic Modular Control Panel II (EMCP II) Starting Motor Remains Engaged (for EUI Engines)
2001/11/01 The Timing Marks Have Been Improved On The Front and Rear Balancer Gears {1220}
3408E and 3412E Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
3408E and 3412E Engines for Caterpillar Built Machines Basic Engine
SCT673 Truck Mounted PumperPOD Fan Belt - Inspect/Adjust/Replace
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 153-3081 Generator through 153-3098 Generator
Power Module Switchgear (Low Voltage and Medium Voltage) Fire Prevention and Explosion Prevention
G3600 Engines System Overview
G3300 Engines Plate Locations and Film Locations
SCT673 Truck Mounted PumperPOD Power End Oil and Filter - Change
Electronic Modular Control Panel II (EMCP II) Shutdown Mode
SCT673 Truck Mounted PumperPOD Manual Stop Procedure
Electronic Modular Control Panel II (EMCP II) Service Mode
G3300 Engines Engine Valve Lash - Inspect/Adjust
C9 Marine Engines Digital Sensor Supply Circuit - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines General Information
Electronic Modular Control Panel II (EMCP II) Hourmeter Programming OP7
SPT343 Truck Mounted Pumper Product Description
3054 and 3056 Industrial and Generator Set Engines Troubleshooting
2002/03/01 A New Cover Assembly Helps Hold The Oil Screen In Place {1302}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.