3054 and 3056 Marine Generator Sets Caterpillar

Reference Numbers

Usage:

3054 CHN

Information for the following items may be needed to order parts. Locate the information for your engine. Record the information on the appropriate space. Make a copy of this list for a record. Retain the information for future reference.

Record for Reference

Engine Model ____________________

Engine Serial Number ____________________

Engine Arrangement Number ____________________

Modification Number ____________________

Engine Low Idle rpm ____________________

Engine Full Load rpm ____________________

Part Number for the Primary Fuel Filter ____________________

Part Number for the Water Separator Element ____________________

Part Number for the Secondary Fuel Filter Element ____________________

Part Number for the Lubrication Oil Filter Element ____________________

Total Lubrication System Capacity ____________________

Total Cooling System Capacity ____________________

Part Number for the Air Cleaner Element ____________________

Part Number for the Fan Drive Belt ____________________

Part Number for the Alternator Belt ____________________

Model Number of the Generator ____________________

Serial Number of the Generator ____________________

Arrangement Number of the Generator ____________________

Part Number for the Control Panel ____________________

Caterpillar Information System:

3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Event Codes

3054 and 3056 Marine Generator Sets Voltage Connections

2001/09/01 New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}

Generator Set Start Module (AC Input) Information Plate

3512B Petroleum Engines with the ADEM 2 Electronic Control Module E097 Engine Derate Overridden

3126 Truck Engine Air Inlet Elbow

2001/09/01 Caterpillar No Longer Recommends The Use Of 195-6071 Spark Plugs Or 195-6353 Spark Plugs On G3300 Engines Or G3400 Engines {1555}

3126B and 3126E Truck Engines Electric Starting Motor

Automatic Transfer Switches CTS, CTSD Series Sensors

3512B Petroleum Engines with the ADEM 2 Electronic Control Module E085 Engine Shutdown Overridden

SCT673 Truck Mounted PumperPOD Model View Illustrations

3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E038 Low Engine Coolant Temperature Warning

2001/09/01 A New Service Manual Module, RENR5851 is Available for the 150-7700 Tachometer {7462}

3054 and 3056 Marine Generator Sets After Starting Engine

C6.6 Marine Generator Set Heat Exchanger - Inspect

3126 Truck Engine Air Inlet Heater

3114, 3116, and 3126 Industrial and Generator Set Engines Engine Operation - Test

3054E and 3056E Industrial Engines Fuel System Secondary Filter - Replace

3126 Truck Engine Electronic Control Wiring Group - Air Inlet Heater

2001/10/01 A Process for Product Support has been Established for the Custom Parts that are part of the 3500 Family and 3600 Family of Engine Packages {1000, 1800}

2001/10/01 Information For Determining The Correct Pulses Per Revolution For Speed Pickups On Napier 297 Turbochargers {7462}

3512B Engine for SPF343, SPS343, and SPT343 Pumpers Control Module (Pump Pressure) - Calibrate

3054 and 3056 Marine Generator Sets Generator Lead Connections

3512B Engine for SPF343, SPS343, and SPT343 Pumpers Control Module (Pump Rate and Engine Rate) - Calibrate