Voltage Connections
The three voltage connections that are available are shown in the following diagrams.
The terminals must be connected securely. The terminals must also be insulated with a good quality electrical tape.
Show/hide table
Illustration 1 | g00637319 |
Typical Series Wye Configuration at 60 Hz with 12 Leads This is a typical high voltage connection. |
Show/hide table
Illustration 2 | g00637320 |
Typical Parallel Wye Configuration at 60 Hz with 12 Leads |
Show/hide table
Illustration 3 | g00626130 |
Typical Delta Configuration at 60 Hz with 12 Leads |
Caterpillar Information System:
2001/09/01 New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
Generator Set Start Module (AC Input) Information Plate
3512B Petroleum Engines with the ADEM 2 Electronic Control Module E097 Engine Derate Overridden
3126 Truck Engine Air Inlet Elbow
2001/09/01 Caterpillar No Longer Recommends The Use Of 195-6071 Spark Plugs Or 195-6353 Spark Plugs On G3300 Engines Or G3400 Engines {1555}
3126B and 3126E Truck Engines Electric Starting Motor
Automatic Transfer Switches CTS, CTSD Series Sensors
3512B Petroleum Engines with the ADEM 2 Electronic Control Module E085 Engine Shutdown Overridden
SCT673 Truck Mounted PumperPOD Model View Illustrations
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E038 Low Engine Coolant Temperature Warning
3512B Petroleum Engines with the ADEM 2 Electronic Control Module E040 Low Engine Oil Pressure Shutdown
2001/10/01 New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Disassembly and Assembly Manuals) {1251}
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Event Codes
3054 and 3056 Marine Generator Sets Reference Numbers
2001/09/01 A New Service Manual Module, RENR5851 is Available for the 150-7700 Tachometer {7462}
3054 and 3056 Marine Generator Sets After Starting Engine
C6.6 Marine Generator Set Heat Exchanger - Inspect
3126 Truck Engine Air Inlet Heater
3114, 3116, and 3126 Industrial and Generator Set Engines Engine Operation - Test
3054E and 3056E Industrial Engines Fuel System Secondary Filter - Replace
3126 Truck Engine Electronic Control Wiring Group - Air Inlet Heater
2001/10/01 A Process for Product Support has been Established for the Custom Parts that are part of the 3500 Family and 3600 Family of Engine Packages {1000, 1800}
2001/10/01 Information For Determining The Correct Pulses Per Revolution For Speed Pickups On Napier 297 Turbochargers {7462}
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Control Module (Pump Pressure) - Calibrate