Bucket - Remove and Install
Removal Procedure
- Position bucket (3) flat on the floor with the stick in a vertical position.
Show/hide table
Illustration 1 | g01181527 |
- Remove locking pins (1) and pin assemblies (2) .
- Use the machine hydraulics to remove the bucket linkage from bucket (3). The weight of bucket (3) is approximately 25 kg (55 lb).
Installation Procedure
Note: Clean all pin bores before installing the bucket.
- Use the machine hydraulics to position the bucket linkage onto bucket (3). The weight of bucket (3) is approximately 25 kg (55 lb).
Show/hide table
Illustration 2 | g01181527 |
- Install pin assemblies (2) and locking pins (1) .
Caterpillar Information System:
336D MHPU Mobile Hydraulic Power Unit Hydraulic System Check Valve (Load)
302.5C Mini Hydraulic Excavator Machine Systems Selector Valve (Alternate Pattern Control) - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Flywheel - Remove and Install
2005/06/27 An Improved Fuel Cap is Available {1273}
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Install
GSH15 and GSH20 Orange Peel Grapples Daily Inspection
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Remove
M318C and M322C Excavators Machine Systems Control Manifold (Pilot Oil) - Assemble
M318C and M322C Excavators Machine Systems Control Manifold (Pilot Oil) - Disassemble
325C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install - Hydraulic Lockout, Swing Brake, and Travel
325C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove - Hydraulic Lockout, Swing Brake, and Travel
302.5C Mini Hydraulic Excavator Machine Systems Fuel Tank - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 06
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Lifting Capacities
303.5C and 303C Mini Hydraulic Excavators Machine Systems Front Idler - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Relief Valve (Scarifier)
325C Excavator Engine Supplement Aftercooler - Remove and Install
325C Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
C15 and C18 Tier 4 Final Engines Vibration Damper - Check
303.5C and 303C Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove and Install