Swing Cushion Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the swing cushion valve. Refer to Disassembly and Assembly, "Swing Cushion Valve - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove manifolds (1) .
Show/hide table
Illustration 1 | g01167461 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove O-ring seals (2) and (3) and relief valves (4) and (5) .
- Remove spring (6), plunger (7), and ball (8) from relief valve (4) .
Show/hide table
Illustration 2 | g01167462 |
- Remove O-ring seal (9) and backup ring (10) from relief valve (4) .
- Repeat Steps 3 and 4 for relief valve (5) .
Caterpillar Information System:
325C LCR Excavator Machine Systems Swing Cushion Valve - Install
325C LCR Excavator Machine Systems Swing Cushion Valve - Remove
330D and 336D Excavators Safety Messages
325C LCR Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Install
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Remove
325C Excavator Engine Supplement Fuel Transfer Pump and Primary Filter (Water Separator) - Remove and Install
325C Excavator Engine Supplement Engine Electronic Control - Remove and Install
M318C and M322C Excavators Engine Supplement Alternator - Remove and Install
325C Excavator Engine Supplement Inlet Manifold - Remove and Install
M318C and M322C Excavators Engine Supplement Air Cleaner - Remove and Install
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Bushings - Lubricate
325C LCR Excavator Machine Systems Swing Cushion Valve - Assemble
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Temperature Sensor (Torque Converter Oil)
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Remove
M318C and M322C Excavators Engine Supplement Engine - Remove
M318C and M322C Excavators Engine Supplement Engine - Install
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Install
325C LCR Excavator Machine Systems Swing Motor - Remove
325C LCR Excavator Machine Systems Swing Motor - Install