Alternator - Remove and Install
Removal Procedure
- Disconnect harness assemblies (3) and (6). Disconnect cable assembly (5) .
Show/hide table
Illustration 1 | g01167396 |
- Loosen bolts (1) and (7). Reposition belts (4) .
- Remove bolts (1) and (7). Remove alternator (2) .
Installation Procedure
- Position alternator (2) and install bolts (1) and (7) .
Show/hide table
Illustration 2 | g01167396 |
- Install belts (4). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".
- Connect cable assembly (5). Connect harness assemblies (3) and (6) .
Caterpillar Information System:
325C Excavator Engine Supplement Inlet Manifold - Remove and Install
M318C and M322C Excavators Engine Supplement Air Cleaner - Remove and Install
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Bushings - Lubricate
M318C and M322C Excavators Engine Supplement Turbocharger - Install
M318C and M322C Excavators Engine Supplement Turbocharger - Remove
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
325C LCR Excavator Machine Systems Heating and Air Conditioning Unit - Install
325C LCR Excavator Machine Systems Heating and Air Conditioning Unit - Remove
VT30, VT40, VT50 and VT60 Multi-Processors General Maintenance Information
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Fuel Tank Cap and Strainer - Clean
325C LCR Excavator Machine Systems Refrigerant Condenser - Install
325C LCR Excavator Machine Systems Refrigerant Condenser - Remove
325C Excavator Engine Supplement Engine Electronic Control - Remove and Install
325C Excavator Engine Supplement Fuel Transfer Pump and Primary Filter (Water Separator) - Remove and Install
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Remove
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Install
325C LCR Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
330D and 336D Excavators Safety Messages
325C LCR Excavator Machine Systems Swing Cushion Valve - Remove
325C LCR Excavator Machine Systems Swing Cushion Valve - Install
325C LCR Excavator Machine Systems Swing Cushion Valve - Disassemble
325C LCR Excavator Machine Systems Swing Cushion Valve - Assemble
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Temperature Sensor (Torque Converter Oil)