Unit Injector Hydraulic Pump Drive - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Position unit injector pump (1) and install bolts (6) .
Show/hide table
 | |
| Illustration 1 | g01167414 |
- Connect harness assembly (5) .
- Connect hose assembly (4) and tube assembly (3) .
- Install tube assembly (2) .
Caterpillar Information System:
325C Excavator Engine Supplement Unit Injector Hydraulic Pump Drive - Remove
325C Excavator Engine Supplement Fuel Transfer Pump and Primary Filter (Water Separator) - Remove and Install
325C Excavator Engine Supplement Engine Electronic Control - Remove and Install
M318C and M322C Excavators Engine Supplement Alternator - Remove and Install
325C Excavator Engine Supplement Inlet Manifold - Remove and Install
M318C and M322C Excavators Engine Supplement Air Cleaner - Remove and Install
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Bushings - Lubricate
M318C and M322C Excavators Engine Supplement Turbocharger - Install
M318C and M322C Excavators Engine Supplement Turbocharger - Remove
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
325C LCR Excavator Machine Systems Heating and Air Conditioning Unit - Install
325C LCR Excavator Machine Systems Heating and Air Conditioning Unit - Remove
325C LCR Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
330D and 336D Excavators Safety Messages
325C LCR Excavator Machine Systems Swing Cushion Valve - Remove
325C LCR Excavator Machine Systems Swing Cushion Valve - Install
325C LCR Excavator Machine Systems Swing Cushion Valve - Disassemble
325C LCR Excavator Machine Systems Swing Cushion Valve - Assemble
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Temperature Sensor (Torque Converter Oil)
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
325C LCR Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Remove