Rated Load
Show/hide table
Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations. |
Note: Rated loads should be used as a guideline. Work tools, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Show/hide table
Illustration 1 | g00630434 |
Position (A) represents the placement height. Position (B) represents the reach. |
The maximum height from the ground to the top face of the forks is given for forks that are horizontal at maximum lift height. The reach from the front tires to the front face of the forks is given for forks that are horizontal at maximum lift height.
Show/hide table
Fork Ar 257-1962 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
950G Series II Logger Ar | |
|
|
|
950G Series II Standard Ar | |
|
|
|
950G Series II High Lift Ar | |
|
|
|
962G Series II Standard Ar | |
|
|
|
962G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 255-8931 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
966G Series II Logger Ar | |
|
|
|
966G Series II Standard Ar | |
|
|
|
966G Series II High Lift Ar | |
|
|
|
972G Series II Standard Ar | |
|
|
|
972G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 255-8980 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
966G Series II Logger Ar | |
|
|
|
966G Series II Standard Ar | |
|
|
|
966G Series II High Lift Ar | |
|
|
|
972G Series II Standard Ar | |
|
|
|
972G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 256-7361 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
950G Series II Logger Ar | |
|
|
|
950G Series II Standard Ar | |
|
|
|
950G Series II High Lift Ar | |
|
|
|
962G Series II Standard Ar | |
|
|
|
962G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 257-1959 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
950G Series II Logger Ar | |
|
|
|
950G Series II Standard Ar | |
|
|
|
950G Series II High Lift Ar | |
|
|
|
962G Series II Standard Ar | |
|
|
|
962G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 257-1960 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
950G Series II Logger Ar | |
|
|
|
950G Series II Standard Ar | |
|
|
|
950G Series II High Lift Ar | |
|
|
|
962G Series II Standard Ar | |
|
|
|
962G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 257-1967 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
950G Series II Logger Ar | |
|
|
|
950G Series II Standard Ar | |
|
|
|
950G Series II High Lift Ar | |
|
|
|
962G Series II Standard Ar | |
|
|
|
962G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 257-1973 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
966G Series II Logger Ar | |
|
|
|
966G Series II Standard Ar | |
|
|
|
966G Series II High Lift Ar | |
|
|
|
972G Series II Standard Ar | |
|
|
|
972G Series II High Lift Ar | |
|
|
|
Show/hide table
Fork Ar 253-7320 | ||||
---|---|---|---|---|
Machine Ar | Fork Tine Length | Rated Operating Load | Placement Height
A |
Reach
B |
966G Series II Logger Ar | |
|
|
|
966G Series II Standard Ar | |
|
|
|
966G Series II High Lift Ar | |
|
|
|
972G Series II Standard Ar | |
|
|
|
972G Series II High Lift Ar | |
|
|
|
Caterpillar Information System:
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped
3306C Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
Logging Forks Reference Material
Logging Forks Safety Messages
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Swing Gear and Bearing
318C and 319C Excavators Hydraulic System Displacement Change Valve
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
Logging Forks Log Fork - Lubricate
Logging Forks Daily Inspection
Logging Forks Lifting and Tying Down
Logging Forks Transport Position
Logging Forks Work Tool Installation and Removal
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Tilt Cylinder
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
3306C Engines for Caterpillar Built Machines Gear Group (Front) - Time
318C and 319C Excavators Hydraulic System Main Hydraulic System
2004/10/04 A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
365C Excavator Hydraulic System Electronic Control System
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Return and Oil Filter Lines
311C Excavator Machine System Specifications Track
3306C Engines for Caterpillar Built Machines Governor - Adjust
365C Excavator Hydraulic System Joystick Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Drive Shaft
M318C and M322C Excavators Magnet Controller Generator Set - Test and Adjust - 12.5 kW Version