Track
Show/hide table
 | |
| Illustration 1 | g01294432 |
Tighten the track bolts to 175 ± 40 N·m (130 ± 30 lb ft). Tighten the bolts to an additional 120° ± 5°.
The maximum assembly force for the link assembly is 350 kN (80000 lb).
The assembly force for the master pin is 77 kN (17300 lb).
(A) The distance between the bolt holes ... 107.94 ± 0.37 mm (4.25 ± 0.015 inch)
(B) The distance between the bolt holes ... 107.94 ± 0.37 mm (4.250 ± 0.015 inch)
(C) The protrusion for each end of the standard bushing ... 3.03 ± 0.25 mm (0.119 ± 0.010 inch)
(D) The protrusion for one end of the standard pin ... 3.03 ± 0.70 mm (0.119 ± 0.028 inch)
(F) The protrusion for the master bushing ... 0.00 ± 0.25 mm (0.0000 ± 0.010 inch)
Caterpillar Information System:
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Return and Oil Filter Lines
365C Excavator Hydraulic System Electronic Control System
2004/10/04 A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
318C and 319C Excavators Hydraulic System Main Hydraulic System
3306C Engines for Caterpillar Built Machines Gear Group (Front) - Time
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Tilt Cylinder
Logging Forks Rated Load
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped
3306C Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
Logging Forks Reference Material
Logging Forks Safety Messages
3306C Engines for Caterpillar Built Machines Governor - Adjust
365C Excavator Hydraulic System Joystick Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Drive Shaft
M318C and M322C Excavators Magnet Controller Generator Set - Test and Adjust - 12.5 kW Version
C11 and C13 Engines for Caterpillar Built Machines CID 0248 FMI 12 Cat Data Link failed
314D CR Excavator Machine System Specifications Track
318C and 319C Excavators Hydraulic System Final Drive
365C Excavator Hydraulic System Pump Control (Main Hydraulic)
345C Excavator Hydraulic System Main Hydraulic System
318C Excavator Stopping the Engine
3306C Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
320C Excavator Stopping the Engine