Drive Shaft
Show/hide table
Illustration 1 | g03647487 |
Right side view |
Show/hide table
Specification for 233-0175 Drive Shaft Gp | |||
Item | Qty | Part | Specification Description |
1 | 20 | 234-6681 Bolt | Use the following procedure to tighten the bolts for the U - Joints:
Before assembly, wipe the bearing cap and the yoke mounting faces. Use the run down bolts to seat the U - Joints. Then, replace the run down bolts with new 234-6681 Bolt. Tighten the bolt in a crisscross pattern to Again, Tighten the bolt in a crisscross pattern to |
2 | 1 | 8T-0362 Bolt | Torque to |
3 | 1 | 8T-0336 Pressure Relief Fitting | Install 107-5002 Bearing Cage with 8T-0336 Pressure Relief Fitting located on the left side of the machine. |
4 | 2 | 8T-3007 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
Caterpillar Information System:
365C Excavator Hydraulic System Joystick Control
3306C Engines for Caterpillar Built Machines Governor - Adjust
311C Excavator Machine System Specifications Track
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Return and Oil Filter Lines
365C Excavator Hydraulic System Electronic Control System
2004/10/04 A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
318C and 319C Excavators Hydraulic System Main Hydraulic System
3306C Engines for Caterpillar Built Machines Gear Group (Front) - Time
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Tilt Cylinder
Logging Forks Rated Load
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped
M318C and M322C Excavators Magnet Controller Generator Set - Test and Adjust - 12.5 kW Version
C11 and C13 Engines for Caterpillar Built Machines CID 0248 FMI 12 Cat Data Link failed
314D CR Excavator Machine System Specifications Track
318C and 319C Excavators Hydraulic System Final Drive
365C Excavator Hydraulic System Pump Control (Main Hydraulic)
345C Excavator Hydraulic System Main Hydraulic System
318C Excavator Stopping the Engine
3306C Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
320C Excavator Stopping the Engine
330D and 336D Excavators Securing the Machine
3306C Engines for Caterpillar Built Machines Turbocharger - Inspect
320C Excavator Fuel Tank Water and Sediment - Drain