Tilt Cylinder
Show/hide table
Illustration 1 | g03648584 |
Show/hide table
Specification for 119-8863 Tilt Cylinder Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 4J-6374 Bushing | Bore before assembly is |
2 | 1 | 173-9683 Bolt | Torque to |
A | 1 | 119-8865 Cylinder As | Bore is |
B | 1 | 119-8864 Rod As | Diameter is |
3 | 1 | 9T-2822 Head | Before assembly, lubricate the threads with clean grease.
Torque to Bore (C) over four lands is |
4 | 28 | 8E-9212 Shim | As required, use the shim:
Thickness of one shim is |
5 | 1 | 289-2935 Buffer Seal As | Lubricate the sealing lip lightly with lubricant that is being sealed. |
6 | 1 | 289-2946 U-Cup Seal | Lubricate the sealing lip lightly with lubricant that is being sealed. |
7 | 1 | 308-1845 Wiper Seal | Lubricate the sealing lip lightly with lubricant that is being sealed. |
8 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
Logging Forks Rated Load
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped
3306C Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
Logging Forks Reference Material
Logging Forks Safety Messages
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Swing Gear and Bearing
318C and 319C Excavators Hydraulic System Displacement Change Valve
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
Logging Forks Log Fork - Lubricate
Logging Forks Daily Inspection
Logging Forks Lifting and Tying Down
Logging Forks Transport Position
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
3306C Engines for Caterpillar Built Machines Gear Group (Front) - Time
318C and 319C Excavators Hydraulic System Main Hydraulic System
2004/10/04 A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
365C Excavator Hydraulic System Electronic Control System
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Return and Oil Filter Lines
311C Excavator Machine System Specifications Track
3306C Engines for Caterpillar Built Machines Governor - Adjust
365C Excavator Hydraulic System Joystick Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Drive Shaft
M318C and M322C Excavators Magnet Controller Generator Set - Test and Adjust - 12.5 kW Version
C11 and C13 Engines for Caterpillar Built Machines CID 0248 FMI 12 Cat Data Link failed