Log Fork - Lubricate
Show/hide table
Illustration 1 | g00730144 |
Typical example |
Note: Wipe all the fittings before you lubricate the fittings.
Lubricate the fittings. There are six fittings. There are 3 fittings on the left side of the fork and 3 fittings on the right side of the fork. There is one fitting on each of the four pins (1) and (3) that mount the cylinders to the fork clamp and to the fork carriage. Two of the pins (1) mount the top of the cylinder to the fork clamp. The other two pins (3) mount the bottom of the cylinder to the fork carriage. The other two fittings are located on the pivot pins (2) that mount the fork clamp to the fork carriage.
Caterpillar Information System:
Logging Forks Daily Inspection
Logging Forks Lifting and Tying Down
Logging Forks Transport Position
Logging Forks Work Tool Installation and Removal
Logging Forks Plate Locations and Film Locations
Logging Forks Approved Machines
M313C and M315C Excavators Engine Oil and Filter - Change
M313C and M315C Excavators Engine Oil Sample - Obtain
CV16B and CV18B Vibratory Compactors Frame (Rear) - Remove and Install
318C and 319C Excavators Hydraulic System Oil Makeup (Travel System)
M318C Wheeled Excavator Machine System Blade Lift Cylinder
Logging Forks Wear Tip - Inspect/Replace - If Equipped
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
318C and 319C Excavators Hydraulic System Displacement Change Valve
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Swing Gear and Bearing
Logging Forks Safety Messages
Logging Forks Reference Material
3306C Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped
Logging Forks Rated Load
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Tilt Cylinder
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
3306C Engines for Caterpillar Built Machines Gear Group (Front) - Time
318C and 319C Excavators Hydraulic System Main Hydraulic System