Plate Locations and Film Locations
Serial Number
Cat work tools are identified with serial numbers.
The serial number plate (1) is located inside the mounting bracket that is attached to the stick of the host machine.
Show/hide table
Illustration 1 | g00726750 |
(1) Serial number plate location |
Show/hide table
Illustration 2 | g01474613 |
(1) Serial number plate |
For quick reference, record the identification numbers in the spaces that are provided below.
Serial Number of the Work Tool____________________
Model____________________
Year of Manufacture____________________
Approximate Weight____________________
Caterpillar Information System:
Logging Forks Approved Machines
M313C and M315C Excavators Engine Oil and Filter - Change
M313C and M315C Excavators Engine Oil Sample - Obtain
CV16B and CV18B Vibratory Compactors Frame (Rear) - Remove and Install
318C and 319C Excavators Hydraulic System Oil Makeup (Travel System)
M318C Wheeled Excavator Machine System Blade Lift Cylinder
Logging Forks Wear Tip - Inspect/Replace - If Equipped
318C and 319C Excavators Hydraulic System Travel Hydraulic System
Logging Forks Storage
Logging Forks Shipping
M318C and M322C Excavators Magnet Controller Material Is Not Lifted
3306C Engines for Caterpillar Built Machines Fuel System - Inspect
Logging Forks Work Tool Installation and Removal
Logging Forks Transport Position
Logging Forks Lifting and Tying Down
Logging Forks Daily Inspection
Logging Forks Log Fork - Lubricate
3306C Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
318C and 319C Excavators Hydraulic System Displacement Change Valve
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications Swing Gear and Bearing
Logging Forks Safety Messages
Logging Forks Reference Material
3306C Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Joystick Steering - If Equipped