Removal Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: For information on the reusability of components of the turbocharger, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8018, "Turbochargers". For information on the salvage of components of the turbocharger, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8071, "Procedures to Salvage Turbocharger Components".
- Disconnect oil supply tube (1) from turbocharger (5) .
 | |
| Illustration 1 | g00624886 |
- Disconnect oil drain tube (2) from turbocharger (5) .
- Loosen clamp (3) .
- Remove four locknuts (4) .
- Remove turbocharger (5) and the gasket from the exhaust manifold.
Note: Place index marks on the turbocharger cartridge and the turbocharger housing.
- Remove the end housings from the cartridge.