Exhaust Bypass Valve - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect tube assembly (2) and clamp (3) from exhaust bypass valve (1).
Show/hide table
Illustration 2 g01281081 - Disconnect tube assembly (5) and tube assembly (6).
- Remove bolts (4), exhaust bypass valve (1), and the gasket.
Show/hide table
Illustration 1 | g01282236 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the gasket, exhaust bypass valve (1), and bolts (4).
- Connect tube assembly (5) and tube assembly (6).
Show/hide table
Illustration 4 g01282236 - Connect tube assembly (2) and clamp (3) to exhaust bypass valve (1).
Show/hide table
Illustration 3 | g01281081 |
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Turbocharger - Remove
3406E and 3456 Generator Set Engines Alternator - Remove and Install
3500B Engines Electric Starting Motor - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 330 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
G3500 Engines Exhaust Manifold - Install - Water Cooled
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 269 FMI 4 Sensor Power Supply Voltage Below Normal - Test
G3500 Engines Exhaust Manifold - Remove - Water Cooled
G3606 and G3608 Engines Turbocharger - Assemble
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 269 FMI 3 Sensor Power Supply Voltage Above Normal - Test
3500B Engines Alternator - Remove and Install
G3500 Engines Aftercooler - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 248 FMI 9 CAT Data Link Abnormal Update - Test
3500B Engines Expansion Tank - Remove and Install
G3500 Engines Exhaust Elbow - Remove and Install
3612 and 3616 Engines Water Pump
3612 and 3616 Engines Water Pump - Sea Water
G3500 Engines Exhaust Elbow - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines Carburetor - Remove - High Pressure
G3500 Engines Carburetor - Remove - Low Pressure
G3606 and G3608 Engines Junction Box (Hydrax) - Remove and Install
3500B Engines Exhaust Elbow - Remove and Install
3524B Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
G3500 Engines Carburetor - Remove - Low Pressure