G3500 Engines Caterpillar


Exhaust Elbow - Remove and Install

Usage:

G3508 2TJ

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00597041

  1. Remove exhaust heat shield (1) from the exhaust elbow.


    Illustration 2g00597043

  2. Remove the nuts and bolts (4).

  3. Remove two nuts (3) and the bolts.

  4. Remove exhaust elbow (2).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 3g00597043

  1. Position exhaust elbow (2) on the engine.

  2. Install two bolts (3) and the nuts.

  3. Install bolts (4) and the nuts.


    Illustration 4g00597041

  4. Install exhaust heat shield (1) on the exhaust elbow.

Caterpillar Information System:

3612 and 3616 Engines Water Pump - Sea Water
3612 and 3616 Engines Water Pump
G3500 Engines Exhaust Elbow - Remove and Install
3500B Engines Expansion Tank - Remove and Install
G3500 Engines Exhaust Bypass Valve - Remove and Install
3034 Engine for Caterpillar Built Machines Turbocharger - Remove
3406E and 3456 Generator Set Engines Alternator - Remove and Install
3500B Engines Electric Starting Motor - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 330 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
G3500 Engines Exhaust Manifold - Install - Water Cooled
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 269 FMI 4 Sensor Power Supply Voltage Below Normal - Test
G3500 Engines Exhaust Manifold - Remove - Water Cooled
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines Carburetor - Remove - High Pressure
G3500 Engines Carburetor - Remove - Low Pressure
G3606 and G3608 Engines Junction Box (Hydrax) - Remove and Install
3500B Engines Exhaust Elbow - Remove and Install
3524B Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
G3500 Engines Carburetor - Remove - Low Pressure
G3500 Engines Carburetor - Install - High Pressure
G3500 Engines Carburetor - Install - Low Pressure
G3500 Engines Carburetor - Install - Low Pressure
G3606 and G3608 Engines Hydraulic Oil Pump (Hydrax) - Remove and Install
G3500 Engines Carburetor - Disassemble - High Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.