Carburetor - Remove - Low Pressure
Start By:
- Remove the air cleaner.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn off the gas supply.
Show/hide table
Illustration 1 g00597142 - Loosen clamp (1).
- Disconnect tube (2).
- Remove nuts (4) and the bolts from carburetor (3).
- Remove four nuts (5) from the gas line. Remove carburetor (3).
Caterpillar Information System:
3524B Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
3500B Engines Exhaust Elbow - Remove and Install
G3606 and G3608 Engines Junction Box (Hydrax) - Remove and Install
G3500 Engines Carburetor - Remove - Low Pressure
G3500 Engines Carburetor - Remove - High Pressure
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines Exhaust Elbow - Remove and Install
3612 and 3616 Engines Water Pump - Sea Water
3612 and 3616 Engines Water Pump
G3500 Engines Exhaust Elbow - Remove and Install
3500B Engines Expansion Tank - Remove and Install
G3500 Engines Exhaust Bypass Valve - Remove and Install
G3500 Engines Carburetor - Install - High Pressure
G3500 Engines Carburetor - Install - Low Pressure
G3500 Engines Carburetor - Install - Low Pressure
G3606 and G3608 Engines Hydraulic Oil Pump (Hydrax) - Remove and Install
G3500 Engines Carburetor - Disassemble - High Pressure
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Harness Code - Troubleshoot
G3606 and G3608 Engines Hydraulic Tank (Hydrax) - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Front Housing and Covers
3500B Engines Air Starting Motor - Remove
G3500 Engines Carburetor - Assemble - High Pressure
G3500 Engines Carburetor - Disassemble - High Pressure
3500B Engines and 3500 Engines with EUI Option Emergency Stop Switch