Carburetor - Install - Low Pressure
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position carburetor (3) on the gas line and install four nuts (5).
- Install the bolts and nuts (4) that hold carburetor (3) to the adapter.
- Tighten clamp (1).
- Connect tube (2).
Show/hide table
| |
| Illustration 1 | g00597142 |
End By:
- Install the air cleaner.
Caterpillar Information System:
G3500 Engines Carburetor - Install - Low Pressure
G3500 Engines Carburetor - Install - High Pressure
G3500 Engines Carburetor - Remove - Low Pressure
3524B Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
3500B Engines Exhaust Elbow - Remove and Install
G3606 and G3608 Engines Junction Box (Hydrax) - Remove and Install
G3500 Engines Carburetor - Remove - Low Pressure
G3500 Engines Carburetor - Remove - High Pressure
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500 Engines Exhaust Elbow - Remove and Install
3612 and 3616 Engines Water Pump - Sea Water
3612 and 3616 Engines Water Pump
G3606 and G3608 Engines Hydraulic Oil Pump (Hydrax) - Remove and Install
G3500 Engines Carburetor - Disassemble - High Pressure
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Harness Code - Troubleshoot
G3606 and G3608 Engines Hydraulic Tank (Hydrax) - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Front Housing and Covers
3500B Engines Air Starting Motor - Remove
G3500 Engines Carburetor - Assemble - High Pressure
G3500 Engines Carburetor - Disassemble - High Pressure
3500B Engines and 3500 Engines with EUI Option Emergency Stop Switch
3034 Engine for Caterpillar Built Machines Turbocharger - Install
G3500 Engines Carburetor - Assemble - High Pressure
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Gear Group (Front)